Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 24504390
Mount Bracket

1996-2005 GM

Customer Questions & Expert Answers (26)
GM 24504390 Mount Bracket
  • Part Description
    Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 1996 Pontiac Trans Sport Mount Bracket Diagram for 24504390
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 24504390

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24504390
    Part DescriptionBracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount
    Other NamesStrut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
    Item Dimensions4.4 x 4.3 x 12.6 inches
    Item Weight5.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24504390
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1996 Buick RegalCustom6 Cyl 3.1 L GAS
    2002-2005 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS
    2000-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    1996-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1996 Chevrolet Lumina APVBase, LS6 Cyl 3.4 L GAS
    1996-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1996-1997 Oldsmobile Cutlass SupremeBase, SL6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1996-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24504390 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24504390 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the engine mount for the 2002 Buick Century? Posted by Customer
    A:
    Disconnect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if there is movement between the metal plate of the engine mount and its attaching points for the 2000 Buick Century? Posted by Customer
    A:
    Lower the engine and tighten the bolts or nuts securing the engine mount to the frame or engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2003 Buick Century? Posted by Customer
    A:
    Lower the vehicle, remove the engine support fixture, install the engine mount struts, and reconnect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    Where can information on the transaxle mount be found for the 2002 Buick Century? Posted by Customer
    A:
    Consult Automatic Transmission Mount Replacement for information on the transaxle mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after lowering the engine with the utility stand for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install the engine mount bracket to the oil pan and secure it with the engine mount bracket-to-oil pan bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the battery ground (negative) cable and remove the throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the oil pan be supported during the process for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Place a block of wood between the utility stand and the oil pan, then use the utility stand to raise the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you prevent damage when removing the engine mount lower nuts for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Insert a block of wood between the oil pan and the jack support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What needs to be done to the engine mount before removing it for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the engine mount lower nuts and raise the engine using the universal engine support fixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What conditions indicate that the engine mount should be replaced for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Replace the engine mount if the hard rubber surface has heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the frame bolts for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the engine mount bracket with the engine mount from the engine, followed by the engine mount upper nuts and the engine mount from the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the engine mount lower nuts for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Tighten them to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What conditions indicate that the engine mount should be replaced for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Replace the engine mount if the hard rubber surface is covered with heat check cracks, if the rubber is separated from the metal plate, or if the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be observed while raising the engine for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Observe the engine mount for conditions that necessitate replacement, such as heat check cracks on the hard rubber surface, separation of the rubber from the metal plate, or a split through the center of the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after raising the 2002 Chevrolet Impala? Posted by Customer
    A:
    Detach the three-way catalytic converter pipe from the right rear exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after securing the engine mount upper nuts for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Install the engine mount bracket with the engine mount to the oil pan and secure it with the engine mount bracket-to-oil pan bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after securing the engine mount bracket for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Lower the vehicle and the engine, then raise the vehicle again to install the engine mount lower nuts, tightening them to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the new engine mount for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the engine mount to the engine mount bracket, ensuring to tighten the upper nuts to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be observed while raising the engine for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Observe the engine mount and replace it if the hard rubber surface is covered with heat check cracks, if the rubber is separated from the metal plate, or if the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the lower nuts for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the engine mount bracket-to-oil pan bolts, followed by the engine mount and engine mount bracket, and finally the engine mount upper nuts to detach the engine mount from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after installing the lower engine mount strut bracket bolt for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Install the vertical engine mount strut bracket bolt through the right engine mount strut bracket to the cylinder head, also tightening it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after installing the bolts for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the thermostat housing and attach the left engine mount strut to the left engine mount strut bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What needs to be done before removing the engine mount lower nuts for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Insert a block of wood between the oil pan and the jack support to prevent damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the engine mount for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the engine mount upper nuts and take the engine mount off the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the bolt and nut from the left engine mount strut bracket for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Remove the bolt and nut from the engine mount strut at the engine mount strut bracket on the upper radiator support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24504390, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24504390 Mount Bracket. It is sometimes referred to as GM Engine Mount, GM Engine Torque Strut Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24504390 Mount Bracket. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery