How to replace the engine mount on 2002 Buick Century?

The first step to replace the Engine Mount requires you to disconnect the battery ground (negative) cable followed by removing the throttle body air inlet duct and Engine Mount struts. Begin by raising the vehicle properly before removing the three-way catalytic converter pipe from the right Exhaust Manifold exhaust. Pull out the wheel and tire from the right front position and detach the right splash shield next. The next step requires removal of Engine Mount lower nuts while lowering the vehicle. The engine support fixture helps lift the engine before the vehicle raises with proper support for installation. Unfasten the bolts securing the Engine Mount bracket to the Oil Pan while you detach the Engine Mount along with its bracket from one another through removal of the upper nuts. The installation process begins with mounting the Engine Mount on the Engine Mount bracket while paying attention to the fastener notice in service precautions and tightening the upper nuts to 47 nm (35 ft. Lbs.). You should attach the Engine Mount bracket to the Oil Pan along with the Engine Mount before installing and tightening the Engine Mount bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Lower the vehicle while performing the engine installations before raising it to support the vehicle properly for mounting the Engine Mount lower nuts which should be torque to 43 nm (32 ft. Lbs.). The right vehicle splash shield and right front wheel assembly with tire must be installed simultaneously with the three-way catalytic converter pipe which needs to be attached to the right Exhaust Manifold. Conclude engine installation by lowering the vehicle then taking off the engine support device before putting the mount struts in position and reattaching the battery ground cable.

OEM 2002 Buick Century Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2002 Buick Century Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2002 Buick Century Mount Bracket
Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2002 Buick Century Strut Mount
Part Number: 10232891
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.4 x 4.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10232891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2002 Buick Century Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2002 Buick Century Strut Mount
Part Number: 10230877
$4.05 MSRP: $6.35
You Save: $2.30 (37%)
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10230877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited, Special, Special Edition | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Buick Century Mount Bracket
Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 4.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24504390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2002 Buick Century Engine Mount

With a comprehensive array of OEM 2002 Buick Century Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Century Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Century Parts Questions & Experts Answers

Q: How to replace the engine mount on 2002 Buick Century?
A: The first step to replace the Engine Mount requires you to disconnect the battery ground (negative) cable followed by removing the throttle body air inlet duct and Engine Mount struts. Begin by raising the vehicle properly before removing the three-way catalytic converter pipe from the right Exhaust Manifold exhaust. Pull out the wheel and tire from the right front position and detach the right splash shield next. The next step requires removal of Engine Mount lower nuts while lowering the vehicle. The engine support fixture helps lift the engine before the vehicle raises with proper support for installation. Unfasten the bolts securing the Engine Mount bracket to the Oil Pan while you detach the Engine Mount along with its bracket from one another through removal of the upper nuts. The installation process begins with mounting the Engine Mount on the Engine Mount bracket while paying attention to the fastener notice in service precautions and tightening the upper nuts to 47 nm (35 ft. Lbs.). You should attach the Engine Mount bracket to the Oil Pan along with the Engine Mount before installing and tightening the Engine Mount bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Lower the vehicle while performing the engine installations before raising it to support the vehicle properly for mounting the Engine Mount lower nuts which should be torque to 43 nm (32 ft. Lbs.). The right vehicle splash shield and right front wheel assembly with tire must be installed simultaneously with the three-way catalytic converter pipe which needs to be attached to the right Exhaust Manifold. Conclude engine installation by lowering the vehicle then taking off the engine support device before putting the mount struts in position and reattaching the battery ground cable.