How to replace the right engine mount on 2005 Buick Rendezvous?

The right Engine Mount replacement process begins by disconnecting the battery ground cable followed by removing the throttle duct air inlet. You must first detach the Engine Mount struts then lift and support your vehicle according to the support method indicated. Start by disconnecting the twc pipe from the Exhaust Manifold located at the engine right side and subsequently remove the right front wheel and tire together with the right engine splash shield. The job requires you to remove Engine Mount lower nuts but install a wooden block between Oil Pan and jack support to stop damage to the Oil Pan. The combination of a utility stand with a block of wood will elevate the engine during the procedure. Engine Mount bracket installation calls for removal of fwd bolts that connect to the Oil Pan and awd users must also sever the Engine Mount bracket-to-engine bolts. The procedure begins by taking off Engine Mount upper nuts followed by Engine Mount off the Engine Mount bracket after removing Engine Mount bracket and Engine Mount. Attach the Engine Mount on its bracket while you install Engine Mount upper nuts using a torque of 53 nm (39 ft. Lbs.). The installation requires attaching the Engine Mount bracket with the Engine Mount to the Oil Pan and tightening the Engine Mount bracket bolts to 58 nm (43 ft. Lbs.) or hand tightening for awd. Installation of the Engine Mount to engine bolt requires application of torque to 58 nm (43 ft. Lbs.) for awd systems. Position the engine on the utility stand and fasten the Engine Mount lower nuts at 47 nm (35 ft. Lbs.). Reposition the right engine splash shield before reconnecting the right front wheel along with tire and re-linking the twc pipe with the Exhaust Manifold located on the engine right side. After completing the process lower the vehicle while you install the Engine Mount struts followed by reconnections of the battery ground (negative) cable.

OEM 2005 Buick Rendezvous Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Engine Mounts found

View related parts
2005 Buick Rendezvous Strut Bracket
Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.1 x 4.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10274661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket
Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Buick Rendezvous Strut
Part Number: 10247084
$52.30 MSRP: $89.05
You Save: $36.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.8 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10247084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket, Driver Side
Part Number: 15250907
$11.48 MSRP: $48.93
You Save: $37.45 (77%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Upper Bracket
- Position: Driver Side
- Replaces: 10312091
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.6 x 8.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket
Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 4.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24504390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket, Passenger Side
Part Number: 10303681
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Engine Mount Bracket; Motor Mount; Upper Bracket; Bracket, Engine Mounting
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.0 x 6.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10303681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Lower Bracket
Part Number: 10325272
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Item Weight: 2.00 Pounds
- Item Dimensions: 10.7 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10325272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Buick Rendezvous Mount Bracket
Part Number: 10334474
Product Specifications
- Other Name: Bracket-Engine Mount; Engine Mount Bracket; Motor Mount; Lower Bracket; Bracket, Engine Mounting
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.8 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS

2005 Buick Rendezvous Engine Mount

With a comprehensive array of OEM 2005 Buick Rendezvous Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the right engine mount on 2005 Buick Rendezvous?
A: The right Engine Mount replacement process begins by disconnecting the battery ground cable followed by removing the throttle duct air inlet. You must first detach the Engine Mount struts then lift and support your vehicle according to the support method indicated. Start by disconnecting the twc pipe from the Exhaust Manifold located at the engine right side and subsequently remove the right front wheel and tire together with the right engine splash shield. The job requires you to remove Engine Mount lower nuts but install a wooden block between Oil Pan and jack support to stop damage to the Oil Pan. The combination of a utility stand with a block of wood will elevate the engine during the procedure. Engine Mount bracket installation calls for removal of fwd bolts that connect to the Oil Pan and awd users must also sever the Engine Mount bracket-to-engine bolts. The procedure begins by taking off Engine Mount upper nuts followed by Engine Mount off the Engine Mount bracket after removing Engine Mount bracket and Engine Mount. Attach the Engine Mount on its bracket while you install Engine Mount upper nuts using a torque of 53 nm (39 ft. Lbs.). The installation requires attaching the Engine Mount bracket with the Engine Mount to the Oil Pan and tightening the Engine Mount bracket bolts to 58 nm (43 ft. Lbs.) or hand tightening for awd. Installation of the Engine Mount to engine bolt requires application of torque to 58 nm (43 ft. Lbs.) for awd systems. Position the engine on the utility stand and fasten the Engine Mount lower nuts at 47 nm (35 ft. Lbs.). Reposition the right engine splash shield before reconnecting the right front wheel along with tire and re-linking the twc pipe with the Exhaust Manifold located on the engine right side. After completing the process lower the vehicle while you install the Engine Mount struts followed by reconnections of the battery ground (negative) cable.

Related 2005 Buick Rendezvous Parts

Alternate Year Models

2004 Buick Rendezvous Engine Mount 2006 Buick Rendezvous Engine Mount