Make sure this part fits

GM 10325272
Lower Bracket

2001-2006 GM

Customer Questions & Expert Answers (26)
GM 10325272 Lower Bracket
  • Part Description
    Bracket, Engine Mounting; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Saturn Relay2, 36 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10325272 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10325272 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the transaxle mount bracket for the 2005 Buick Terraza? Posted by Customer
    A:
    Take off the transaxle mount lower nuts securing the transaxle mount to the transaxle mount frame bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the engine mount lower nuts for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Use a utility stand and a block of wood to raise the engine, then remove the engine mount bracket-to-oil pan bolts, followed by the engine mount and engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after attaching the transaxle mount to the frame bracket for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the lower nuts and tighten them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after lowering the engine for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Install the engine mount lower nuts, tightening them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the purpose of raising the transmission/transaxle for the 2002 Buick Rendezvous? Posted by Customer
    A:
    To relieve the weight from the transmission/transaxle mount and create slight tension in the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What needs to be removed to detach the engine mount bracket for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the engine mount upper nuts and detach the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2004 Buick Rendezvous? Posted by Customer
    A:
    First, remove the engine mount and the upper nuts from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the purpose of raising the transmission/transaxle for the 2006 Buick Rendezvous? Posted by Customer
    A:
    To remove the weight from the transmission/transaxle mount and create slight tension in the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after raising and supporting the 2002 Buick Rendezvous? Posted by Customer
    A:
    Detach the catalytic converter pipe from the engine right side exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the new engine mount for the 2006 Buick Terraza? Posted by Customer
    A:
    Attach the engine mount to the engine mount bracket, then install the bracket with the mount to the oil pan, tightening the bracket-to-oil pan bolts to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after installing the transaxle mount for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Reattach the transaxle mount bracket to the transaxle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in removing the transaxle mount for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Detach the transaxle mount from the frame bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the purpose of raising the transmission/transaxle for the 2003 Buick Rendezvous? Posted by Customer
    A:
    To relieve the weight from the transmission/transaxle mount and create slight tension in the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after removing the engine mount/bracket for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Take out the engine mount/bracket and its associated nuts for both FWD and AWD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step for installation of the new transaxle mount for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Attach the transaxle mount to the transaxle mount frame bracket, ensuring to follow the Fastener Notice in Service and Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the right engine mount strut bracket for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the right engine mount strut bracket over the pin locator and install the lower engine mount strut bracket bolt through the right engine mount strut bracket into the cylinder block, tightening it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the transaxle mount bracket for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Remove the transaxle mount lower nuts securing the transaxle mount to the transaxle mount frame bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the engine mount for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the throttle body air inlet duct, engine mount struts, and raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after placing the engine mount strut in position for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Install the bolt and nut to the engine mount strut at the engine mount strut bracket on the upper radiator support, tightening the engine mount strut bolt to 48 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the next steps after installing the new engine mount for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Lower the engine using the utility stand, install the engine mount lower nuts, and tighten them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What conditions should be inspected on the transmission/transaxle mount for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Look for cracks on the rubber surface, separation of the rubber from the metal plate, or splits through the center of the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the engine mount bracket for the 2005 Chevrolet Venture? Posted by Customer
    A:
    First, remove the engine mount assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you remove the engine mount bracket for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Remove the engine mount bracket-to-oil pan bolts, ensuring to insert a block of wood between the utility stand and the oil pan before using the utility stand to raise the oil pan. Then, remove the engine mount upper nuts and take off the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be followed during the installation process for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the engine mount strut bracket bolts be installed for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Install the engine mount strut bracket bolts through the engine mount strut bracket to the cylinder head, tightening them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Bracket 10325272 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10325272 Lower Bracket is available in the market under the name GM Engine Mount, Motor And Transmission Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10325272 Lower Bracket fits certain Chevrolet Uplander, Venture models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10325272 maintains top performance when functioning as the Bracket, Engine Mounting; Motor Mount unit. The component 10325272 is constructed from durable material and its dimensions span 10.7 x 4.2 x 2.1 inches while weighing 2.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10325272 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.