How to replace the engine mount bracket on an AWD on 2003 Buick Rendezvous?

The replacement process of awd vehicle Engine Mount bracket begins with throttle body air inlet duct removal and Engine Mount strut detachment before vehicle elevation and support. Remove the catalytic converter pipe from the engine right side Exhaust Manifold before proceeding to uninstall the right front wheel without tire and the right engine splash shield. During Engine Mount bracket-to-Oil Pan bolt removal keep wooden blocks between the Oil Pan and jack support to protect against damages. The Oil Pan elevation process starts with inserting block wood between the Oil Pan and utility stand followed by stand-controlled lift of the Oil Pan. The procedure requires removal of Engine Mount upper nuts to detach the Engine Mount bracket from the Engine Mount. To install the Engine Mount bracket you should position it first onto the Engine Mount before torquing the Engine Mount upper nuts to 53 nm (39 ft. Lbs.). Lower the engine with the utility stand until you can insert the Engine Mount bracket to the Oil Pan. Secure the Engine Mount bracket-to-Oil Pan bolts to 58 nm (43 ft. Lbs.) while the upper bracket to engine block requires 85 nm (63 ft. Lbs.). The installation requires reattaching the right engine splash shield together with the right front wheel and tire afterwards hook up the catalytic converter pipe to the engine right side Exhaust Manifold before lowering the vehicle to reinstall the Engine Mount struts and throttle body air inlet duct.

OEM 2003 Buick Rendezvous Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2003 Buick Rendezvous Strut Bracket
Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.1 x 4.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10274661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Mount Bracket
Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Buick Rendezvous Strut
Part Number: 10247084
$52.30 MSRP: $89.05
You Save: $36.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.8 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10247084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Buick Rendezvous Mount Bracket
Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 4.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24504390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
2003 Buick Rendezvous Lower Bracket
Part Number: 10325272
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Item Weight: 2.00 Pounds
- Item Dimensions: 10.7 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10325272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

2003 Buick Rendezvous Engine Mount

With a comprehensive array of OEM 2003 Buick Rendezvous Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Rendezvous Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the engine mount bracket on an AWD on 2003 Buick Rendezvous?
A: The replacement process of awd vehicle Engine Mount bracket begins with throttle body air inlet duct removal and Engine Mount strut detachment before vehicle elevation and support. Remove the catalytic converter pipe from the engine right side Exhaust Manifold before proceeding to uninstall the right front wheel without tire and the right engine splash shield. During Engine Mount bracket-to-Oil Pan bolt removal keep wooden blocks between the Oil Pan and jack support to protect against damages. The Oil Pan elevation process starts with inserting block wood between the Oil Pan and utility stand followed by stand-controlled lift of the Oil Pan. The procedure requires removal of Engine Mount upper nuts to detach the Engine Mount bracket from the Engine Mount. To install the Engine Mount bracket you should position it first onto the Engine Mount before torquing the Engine Mount upper nuts to 53 nm (39 ft. Lbs.). Lower the engine with the utility stand until you can insert the Engine Mount bracket to the Oil Pan. Secure the Engine Mount bracket-to-Oil Pan bolts to 58 nm (43 ft. Lbs.) while the upper bracket to engine block requires 85 nm (63 ft. Lbs.). The installation requires reattaching the right engine splash shield together with the right front wheel and tire afterwards hook up the catalytic converter pipe to the engine right side Exhaust Manifold before lowering the vehicle to reinstall the Engine Mount struts and throttle body air inlet duct.