OEM 2002 Chevrolet Venture Oil Cooler

2002 Chevrolet Venture Oil Cooler Parts Questions & Experts Answers

• Q: How to replace the oil cooler on 2002 Chevrolet Venture?

  A: Engine coolant must drain completely from the engine cooling system before starting the replacement process of the Oil Cooler. Raise and support the vehicle. First disconnect the knock sensor electrical connector before removing the Oil Filter. You need to first disconnect the Oil Cooler outlet hose from the Oil Cooler then place it to the side. Start by disconnecting the Oil Cooler connector followed by removing its inlet hose clamp before taking out the Oil Cooler unit. Begin installation of the Oil Cooler by checking the engine block mating surface and installing the Oil Cooler and Oil Cooler inlet hose clamp while ensuring proper positioning of the Oil Cooler seal and application of engine oil on the surface. Fasten the Oil Cooler connector by applying 50 nm of torque (37 ft. Lbs.). Engineers must perform the following steps: install the Oil Filter while better connecting the knock sensor electrical connector. The process involves lowering the vehicle to drain the engine cooling system before filling it with coolant then adding oil if needed before checking for any Oil Cooler leaks.