Make sure this part fits

GM 24504105
Oil Cooler

1996-2004 GM

Customer Questions & Expert Answers (6)
GM 24504105 Oil Cooler
GM 24504105 Oil Cooler
  • Part Description
    Cooler, Engine Oil Cooler
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24504105
    Part DescriptionCooler, Engine Oil Cooler
    Item Dimensions7.0 x 6.4 x 4.3 inches
    Item Weight1.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24504105
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS
    1996-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1996-1999 Chevrolet Monte CarloLS6 Cyl 3.1 L GAS
    1997-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    2001-2004 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    1999-2004 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24504105 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24504105 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the oil cooler on Chevrolet Venture? Posted by Customer
    A:
    Start by draining the engine coolant from the engine cooling system as a first step in cooler oil replacement. The vehicle should be lifted with proper equipment while using support. The knocking sensor electrical connector should be disconnected first while the Oil Filter needs to be removed next. The next step involves separating the Oil Cooler outlet hose from the Oil Cooler and setting it off to the side. The first step is to disconnect the Oil Cooler connector before removing both the Oil Cooler inlet hose clamp and the Oil Cooler from the system. The engine block mating surface needs cleaning before installing the new Oil Cooler and the inlet hose clamp which must be properly sealed with engine oil. Screw in the Oil Cooler connector while tightening it to 50 nm (37 ft. Lbs.). Reconnect the outlet hose to the Oil Cooler along with installation of the new Oil Filter and electrical connection to the Knock Sensor. The procedure involves lowering the car then adding engine coolant to the system followed by necessary engine oil addition before performing the Oil Cooler leak inspection.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the oil cooler outlet hose for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Install the oil filter and reconnect the knock sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler
    Q:
    What is the first step to replace the oil cooler for the 2001 Chevrolet Venture? Posted by Customer
    A:
    First, drain the engine coolant from the engine cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler
    Q:
    What is the first step to replace the oil cooler for the 2002 Chevrolet Venture? Posted by Customer
    A:
    First, drain the engine coolant from the engine cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler
    Q:
    What should be done before installing the oil cooler for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Clean and inspect the engine block mating surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24504105, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24504105 Oil Cooler. It is sometimes referred to as GM Engine Oil Cooler, GM Oil Cooler. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24504105 Oil Cooler. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery