How to replace the left engine mount on 2003 Cadillac Escalade?

Question

Accepted Answer

You should start the replacement of the left Engine Mount by taking out the Engine Mount-to-Engine Mount bracket bolts. A 2wd vehicle needs to be lifted for exposure of the front wheelhouse opening while 4wd vehicles need elevation to take off their front tires and wheels. The replacement process begins with left front wheel removal along with the subsequent removal of wheelhouse inner panel push pin retainers as well as the inner panel. Proceed with engine shield bolt removal along with removing the engine shield itself. Supporting the engine with either the crankshaft balancer or Oil Pan is unsafe during any maintenance operations. Engine mounts need to be accessed with adjustable (screw type) jack stands that support the engine after it has been correctly raised. During 4wd vehicle maintenance remove both the front propeller shaft in addition to the left Engine Mount. You must position the new left Engine Mount to the engine while securing the Engine Mount bolts at 50 nm (37 ft. Lbs.). The front propeller shaft needs reinstallation while removing the supports from beneath the engine. Reposition the engine shield onto the vehicle before installing its bolts with a torque of 20 nm (15 ft. Lbs.). After lowering the vehicle position the left front tire and wheel before tightening the wheelhouse inner panel push pin retainers and the inner panel. Screw and tighten the Engine Mount-to-Engine Mount bracket bolts to 65 nm (48 ft. Lbs.).

OEM 2003 Cadillac Escalade Engine Mount

3 Engine Mounts found

2003 Cadillac Escalade Mount Bracket, Passenger Side Part Number: 15113847

2003 Cadillac Escalade Motor Mount, Green Part Number: 25828247

2003 Cadillac Escalade Mount Bracket, Driver Side Part Number: 15113849

2003 Cadillac Escalade Engine Mount

2003 Cadillac Escalade Engine Mount Parts and Q&A

Related 2003 Cadillac Escalade Parts

Alternate Year Models