How to replace the rear wheel speed sensor in the antilock brake system on 2003 Cadillac Escalade?

As a first step for wheel speed sensor replacement in the antilock brake system you must lift the vehicle. Unplug the power connection and take out the wheel speed sensor-retaining bolt and sensor through its mounting space. Secure the new wheel speed sensor by fitting it over the mounting slot and tightening the bolt at 13 N.m (115 lb in). Plug in the electrical connection while lowering the vehicle back to the ground. Test the vehicle system by starting the engine while letting it idle until the brake indicators turn off. Do not drive the vehicle when the sensor indicators stay lit because you need to diagnose and fix these issues first. Also check the wheel speed sensor electrical connector to verify that it works without physical problems. Drive the vehicle steadily across a flat dry space with few cars and objects at a minimum speed of 16 km/h (10 mph) for 5 seconds. Use the same driveshed area again to verify if the indicators remain turned off. If they do not, consult the antilock brake system diagnostic procedures.

OEM 2003 Cadillac Escalade Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Speed Sensors found

View related parts
2003 Cadillac Escalade ABS Sensor, Front
Part Number: 15233108
$34.44 MSRP: $64.68
You Save: $30.24 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Front Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Trim Panel; Front Speed Sensor; Sensor, Electronic Brake Control
- Position: Front
- Replaced by: 84356646
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.3 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac Escalade Speed Sensor
Part Number: 24225896
$30.84 MSRP: $50.80
You Save: $19.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Vehicle Speed Sensor; ABS Sensor; Sensor, Computer Control Sensors; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 10456520, 10456194
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24225896
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac Escalade Vehicle Speed Sensor
Part Number: 19302667
$45.64 MSRP: $88.57
You Save: $42.93 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Speedometer Driven; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 12376520, 88984527
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Cadillac Escalade Wheel Speed Sensor

With a comprehensive array of OEM 2003 Cadillac Escalade Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac Escalade Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac Escalade Parts Questions & Experts Answers

Q: How to replace the rear wheel speed sensor in the antilock brake system on 2003 Cadillac Escalade?
A: As a first step for wheel speed sensor replacement in the antilock brake system you must lift the vehicle. Unplug the power connection and take out the wheel speed sensor-retaining bolt and sensor through its mounting space. Secure the new wheel speed sensor by fitting it over the mounting slot and tightening the bolt at 13 N.m (115 lb in). Plug in the electrical connection while lowering the vehicle back to the ground. Test the vehicle system by starting the engine while letting it idle until the brake indicators turn off. Do not drive the vehicle when the sensor indicators stay lit because you need to diagnose and fix these issues first. Also check the wheel speed sensor electrical connector to verify that it works without physical problems. Drive the vehicle steadily across a flat dry space with few cars and objects at a minimum speed of 16 km/h (10 mph) for 5 seconds. Use the same driveshed area again to verify if the indicators remain turned off. If they do not, consult the antilock brake system diagnostic procedures.