Other Name: Sensor, Front Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Trim Panel; Front Speed Sensor; Sensor, Electronic Brake Control
Position: Front
Replaced by: 84356646
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Emission Control Sensor(Oxygen); Sensor, Speedometer Drive
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
Cadillac Escalade Wheel Speed Sensor
Our website offers an extensive catalog of genuine Cadillac Escalade Wheel Speed Sensor at unbeatable prices. Every OEM Cadillac Escalade Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade Wheel Speed Sensor Parts Questions & Experts Answers
Q: How to replace the rear wheel speed sensor ring on those with a GVW of less than 3900 kg (8600 lb) on Cadillac Escalade?
A: A vehicle with less than 3900 kg (8600 lb) gvw requires a two-step process to switch the rear Wheel Speed Sensor ring. Lift and stabilize the vehicle followed by tire and wheel assembly removal. You need to remove the rear Wheel Speed Sensor and the axle housing cover first before proceeding. Remove the Axle Shaft using j 45857 and j 2619-01 before taking out the Axle Shaft seal and bearing plus Wheel Speed Sensor ring from the axle housing. Use j 45860 and j 8092 to put the new Wheel Speed Sensor ring into the axle housing until it meets the housing tube. Use duo-set j 23690 and j 8092 to drive the Axle Shaft bearing into position until the tool hits the tube when installing. To install the Axle Shaft seal put the j 21128 tool into the bore and push it until the seal surface touches the tube. Place the shaft inside then put back the rear axle housing cover and install the rear Wheel Speed Sensor. Reinstall the wheel and tire parts before putting required differential oil into the rear axle and lowering the vehicle.