OEM 2003 Chevrolet Malibu Fuel Level Sensor

2003 Chevrolet Malibu Fuel Level Sensor Parts Questions & Experts Answers

• Q: How to service the Fuel Level Sensor on 2003 Chevrolet Malibu?

  A: Service of the Fuel Level Sensor starts with removing its entire assembly. Begin by detaching the Fuel Pump electrical retaining clip at the top of the assembly and disconnect both the Fuel Pump and Fuel Level Sensor electrical connector. Press down on the 3 fuel reservoir tabs followed by lifting the upper reservoir free from connections to the lower reservoir. You should push the tab of the Fuel Level Sensor down when you slowly maneuver it upward from its housing. Unfasten the electrical connector retaining clip before removing the Fuel Level Sensor wires from the connector so you can note which locations they came from. The installation process requires the Fuel Level Sensor to be placed down the slots of lower housing with wires properly positioned underneath until the tab achieves complete locking. After that insert the upper reservoir into the lower reservoir and verify the tabs click into position. Complete the wiring process by attaching both wires to the connector then fix it using the retaining clip. Reinstall the fuel sender assembly after connecting the electrical connector that includes both Fuel Pump and Fuel Level Sensor while using the retaining clip for secure locking.