OEM 2003 Chevrolet Malibu Hazard Warning Switch

2003 Chevrolet Malibu Parts Questions & Experts Answers

• Q: How to replace the hazard warning switch on 2003 Chevrolet Malibu?

  A: The replacement procedure for the hazard warning switch must begin by disabling the SIR system. Start by removing the instrument panel (I/P) cluster trim plate off the I/P carrier along with the possible need to disconnect the dimmer switch electrical connector. The next step involves removing the electrical connector from the hazard warning switch before using a small flat-bladed tool to open its retaining tabs. The hazard warning switch can be removed by applying outward force from behind the I/P cluster trim plate. After correct alignment put the new hazard warning switch into the I/P cluster trim plate opening before pushing it until the switch reaches complete seating position. Connect the electrical connectors between the hazard warning switch and the dimmer switch electrical connector when necessary. Complete the installation by reattaching the I/P cluster trim plate to its place on the I/P carrier then reenable the SIR system.