How to replace the hazard warning switch on Chevrolet Malibu?

Disabling the sir system should be the first step before attempting to replace the Hazard Warning Switch of the vehicle. Start by pulling out the instrument panel cluster trim plate from its position on the ip carrier then break the electrical connection of the dimmer switch if needed. The first step disconnects the Hazard Warning Switch electrical connector. A small flat-bladed tool should be used to depress the tabs so the Hazard Warning Switch can be released from the instrument panel cluster trim plate followed by removing the switch by pulling it outward while keeping the plate in place. The new Hazard Warning Switch should be pushed inward through the trim plate while maintaining pressure on this plate until full seat is achieved. Install the instrument panel cluster trim plate back to the ip carrier after connecting the Hazard Warning Switch electrical connector with the dimmer switch electrical connector if required. Finally, enable the sir system.

OEM Chevrolet Malibu Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hazard Warning Switches found

View related parts
Chevrolet Malibu Hazard Switch
Part Number: 15258590
$15.93 MSRP: $26.22
You Save: $10.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning; Hazard Flasher Switch; Switch, Chassis/Body Marker/Hazard
- Replaces: 22626457
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Hazard Switch
Part Number: 10359580
$39.72 MSRP: $67.88
You Save: $28.16 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning; Hazard Flasher Switch; Switch, Chassis/Body Marker/Hazard
- Replaces: 22594146
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Stab Control Switch
Part Number: 20981229
$11.82 MSRP: $18.50
You Save: $6.68 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Instrument Panel/Interior Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Hazard Switch, Black
Part Number: 84074296
$8.75 MSRP: $15.62
You Save: $6.87 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning *Black; Hazard Flasher Switch; Switch, Chassis/Body Marker/Hazard
- Replaces: 23193196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Hazard Switch, Black
Part Number: 23191937
$20.50 MSRP: $38.50
You Save: $18.00 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning *Black; Hazard Flasher Switch; Switch, Chassis/Body Marker/Hazard
- Replaces: 22956748
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Hazard Switch
Part Number: 15835325
$12.14 MSRP: $21.68
You Save: $9.54 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Chassis/Body Marker/Hazard; Hazard Flasher Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Hazard Switch
Part Number: 20902229
Product Specifications
- Other Name: Switch, Chassis/Body Marker/Hazard; Hazard Flasher Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Stab Control Switch
Part Number: 20848761
Product Specifications
- Other Name: Switch, Instrument Panel/Interior Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS

Chevrolet Malibu Hazard Warning Switch

Our website offers an extensive catalog of genuine Chevrolet Malibu Hazard Warning Switch at unbeatable prices. Every OEM Chevrolet Malibu Hazard Warning Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Malibu Hazard Warning Switch Parts Questions & Experts Answers

Hazard Switch
10359580
Q: How to replace the hazard warning switch on Chevrolet Malibu?
A: Disabling the sir system should be the first step before attempting to replace the Hazard Warning Switch of the vehicle. Start by pulling out the instrument panel cluster trim plate from its position on the ip carrier then break the electrical connection of the dimmer switch if needed. The first step disconnects the Hazard Warning Switch electrical connector. A small flat-bladed tool should be used to depress the tabs so the Hazard Warning Switch can be released from the instrument panel cluster trim plate followed by removing the switch by pulling it outward while keeping the plate in place. The new Hazard Warning Switch should be pushed inward through the trim plate while maintaining pressure on this plate until full seat is achieved. Install the instrument panel cluster trim plate back to the ip carrier after connecting the Hazard Warning Switch electrical connector with the dimmer switch electrical connector if required. Finally, enable the sir system.