How to replace the dimmer switch on Chevrolet Malibu?

If you want to change the dimmer switch , make sure you first turn off the SIR system. Take off the IP cluster trim plate from the IP carrier and disconnect the hazard warning switch connector if it is still connected. You should then disconnect the dimmer switch 's electrical connector and push the flat end of a tool between the retaining tabs to release them. Ensure to push the dimmer switch from the front of the IP cluster trim plate to take it out. Put the dimmer switch into the opening in the IP cluster trim plate and press it in until it locks into place. Attach the dimmer switch electrical connector and, if you took it off, connect the hazard warning switch connector too. After that, put the IP trim plate onto the IP carrier and turn on the SIR system.

OEM Chevrolet Malibu Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Dimmer Switches found

View related parts
Chevrolet Malibu Turn Signal Switch, Green Line
Part Number: 20940369
$43.85 MSRP: $78.31
You Save: $34.46 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Turn Signal Lamp; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Headlamp Dimmer
- Replaces: 15840243, 21994378, 15913467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Multifunction Switch
Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Multifunction Switch, Green Line
Part Number: 15908975
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Washer Switch; Multi Purpose Switch; Air Bag Clockspring; Combination Switch; Wiper, Signal, and Headlamp Dimmer Switch; Clockspring
- Replaces: 01999388, 01999390, 15274610, 1999388, 10400127, 15897617, 1999390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2004-2005 Chevrolet Malibu | Base, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Malibu Dimmer Switch

Our website offers an extensive catalog of genuine Chevrolet Malibu Dimmer Switch at unbeatable prices. Every OEM Chevrolet Malibu Dimmer Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Malibu Dimmer Switch Parts Questions & Experts Answers

Multifunction Switch
19244094
Q: How to replace the dimmer switch on Chevrolet Malibu?
A: If you want to change the dimmer switch , make sure you first turn off the SIR system. Take off the IP cluster trim plate from the IP carrier and disconnect the hazard warning switch connector if it is still connected. You should then disconnect the dimmer switch 's electrical connector and push the flat end of a tool between the retaining tabs to release them. Ensure to push the dimmer switch from the front of the IP cluster trim plate to take it out. Put the dimmer switch into the opening in the IP cluster trim plate and press it in until it locks into place. Attach the dimmer switch electrical connector and, if you took it off, connect the hazard warning switch connector too. After that, put the IP trim plate onto the IP carrier and turn on the SIR system.