How to replace the dimmer switch on 2002 Chevrolet Malibu?

If you want to change the dimmer switch , make sure you first turn off the SIR system. Take off the IP cluster trim plate from the IP carrier and disconnect the hazard warning switch connector if it is still connected. You should then disconnect the dimmer switch 's electrical connector and push the flat end of a tool between the retaining tabs to release them. Ensure to push the dimmer switch from the front of the IP cluster trim plate to take it out. Put the dimmer switch into the opening in the IP cluster trim plate and press it in until it locks into place. Attach the dimmer switch electrical connector and, if you took it off, connect the hazard warning switch connector too. After that, put the IP trim plate onto the IP carrier and turn on the SIR system.

OEM 2002 Chevrolet Malibu Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2002 Chevrolet Malibu Multifunction Switch Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.4 x 7.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2002 Chevrolet Malibu Dimmer Switch

With a comprehensive array of OEM 2002 Chevrolet Malibu Dimmer Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Malibu Dimmer Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Malibu Dimmer Switch Parts and Q&A

Q: How to replace the dimmer switch on 2002 Chevrolet Malibu?
A: If you want to change the dimmer switch , make sure you first turn off the SIR system. Take off the IP cluster trim plate from the IP carrier and disconnect the hazard warning switch connector if it is still connected. You should then disconnect the dimmer switch 's electrical connector and push the flat end of a tool between the retaining tabs to release them. Ensure to push the dimmer switch from the front of the IP cluster trim plate to take it out. Put the dimmer switch into the opening in the IP cluster trim plate and press it in until it locks into place. Attach the dimmer switch electrical connector and, if you took it off, connect the hazard warning switch connector too. After that, put the IP trim plate onto the IP carrier and turn on the SIR system.