OEM 2002 Chevrolet Malibu Neutral Safety Switch

Transmission Neutral Safety Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

  • 2002 Chevy Malibu Neutral Safety Switch - 12450161
    2002 Chevy Malibu Neutral Safety Switch Diagram - 12450161
    View related parts
    Product Specifications
    • Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 7.0 x 7.1 x 1.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12450161
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2002 Chevrolet Malibu Submodels:
    • Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2002 Chevrolet Malibu Neutral Safety Switch

With a comprehensive array of OEM 2002 Chevrolet Malibu Neutral Safety Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Malibu Neutral Safety Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Malibu Neutral Safety Switch Parts Questions & Experts Answers

  • Q: How to replace the Neutral Safety Switch on 2002 Chevrolet Malibu?
    A: Instead of using the pnp switch, visually de-attachment of the electrical connector for the switch and removing the bolts as well as output assembly of park/neutral position switch. During installation, put the shift shaft in the n (Neutral) position and line the flats of the shift shaft with the flats in the park/neutral switch. Put on the park/neutral position switch mounting bolts and tighten to 24 nm(18 ft. Lbs.). Plug the switch electrical connector, making the engine only start while in p (Park), or n (Neutral). Adjust the switch if that should start in any different position. Then put the transmission control shifter assembly in n (Neutral) notch in the detent plate, loosen the attaching bolts umbrella park/neutral position switch, rotate the switch on the shifter assembly so service adjustment does align with the hole in the carrier on the tang hole. Finally, apply a 2.34 mm (3/32 inch) maximum diameter gauge pin 9.0 mm (9/64 inch) depth, the bolts to a 24 nm (18 ft. Lbs.).

Related 2002 Chevrolet Malibu Parts