Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12450161
Neutral Safety Switch

1997-2005 GM

Customer Questions & Expert Answers (15)
GM 12450161 Neutral Safety Switch
  • Part Description
    Switch, Transmission Safety Starting Switch Or Speed Sensing
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1997 Oldsmobile Cutlass Neutral Safety Switch Diagram for 12450161
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12450161

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet CavalierBase, LS, LS Sport, RS, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass Supreme6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2001-2002 Saturn L100Base4 Cyl 2.2 L GAS
    2001-2003 Saturn L200Base4 Cyl 2.2 L GAS
    2001-2003 Saturn L300Base6 Cyl 3.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12450161 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12450161 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Neutral Safety Switch on Chevrolet Malibu? Posted by Customer
    A:
    To replace the pnp switch, the first step is disconnecting the switch electrical connector while removing the attaching bolts and the park/neutral position switch assembly. For installation, set the shift shaft to the park/neutral position, and line up the flats on the shift shaft with those on park/neutral switch. Mount the park/neutral position switch mounting bolts and tighten them to 24 nm (18 ft. Lbs.). Connect the switch electrical connector while the engine starts only in p (Park) or n (Neutral); the previous step does not make any sense - if exercises are performed an abnormal way, the switch will have to be set in multiple positions which can cause improper training. The exercises should be readjusted to have everything right. Next, align the transmission control shifter assembly into the n (Neutral) notch in the detent plate, loosen attaching bolts for the park/neutral position switch and rotate the switch onto the shifter assembly to position the service adjustment pacing the cast hole with the carrier tang hole. Insert a 2.34mm (3/32 inch) maximum diameter gauge pin to a depth of 9.0mm (9/64 inch) and tighten the bolts to 24 nm (18 ft. Lbs. Konnte).
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the backup light switch for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten the switch to 33 Nm (24 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be applied when installing the new backup light switch for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Apply pipe sealant (GM P/N 1052080 or equivalent).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Place the shift shaft in N (Neutral) and align the flats of the shift shaft with the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after aligning the shift shaft with the switch for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Install the park/neutral position switch mounting bolts and tighten them to 24 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    How should the old switch be installed for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Place the shift shaft in N (Neutral) and align the flats of the shift shaft with the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    How should the old switch be installed for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Place the shift shaft in N (Neutral) and align the flats of the shift shaft with the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the first step to replace the backup lamp switch for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    First, disconnect the backup lamp connector and remove the backup light switch assembly, ensuring that only a socket is used to avoid damage to the switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the next step after disconnecting the electrical connectors for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the transaxle range switch lever nut and lever, followed by the transaxle range switch bolts to take out the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be applied to the backup light switch during installation for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Apply pipe sealant GM P/N 1052080 or equivalent to the backup light switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the PNP Switch for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    First disconnect the switch electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the next step after ensuring the engine starts correctly for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Place the transmission control shifter assembly in the N (Neutral) notch in the detent plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    How should the shift shaft be positioned during installation for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Place the shift shaft in the N (Neutral) position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the torque specification for the park/neutral position switch mounting bolts for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Install the park/neutral position switch mounting bolts and tighten them to 24 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Neutral Safety Switch 12450161 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12450161 Neutral Safety Switch is available in the market under the name GM Automatic Transmission Shift Position Sensor Switch, Back Up Light Switch, Neutral Safety Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12450161 Neutral Safety Switch fits certain Chevrolet Malibu, Cavalier models, as well as Pontiac Grand Am, Sunfire. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme and Saturn L200, L300, L100 models.
The original GM component designated by manufacturer part number 12450161 maintains top performance when functioning as the Switch, Transmission Safety Starting Switch Or Speed Sensing unit. The component 12450161 is constructed from durable material and its dimensions span 7.0 x 7.1 x 1.7 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Transmission Safety Start/Warning. The part 12450161 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.