OEM 2004 Cadillac CTS Hood Cable

2004 Cadillac CTS Hood Cable Parts and Q&A

• Q: How to replace the Hood Cable for the Primary Latch Release on 2004 Cadillac CTS?

  A: The first step to replace the Hood Cable starts by lifting the hood then taking off the Hood Latch. The hood release cable must be detached from the Hood Latch and you should add a string to help guide its placement through the engine compartment. Move on to the next step which involves the removal of three fasteners that fasten the handle to the vehicle body and cable release removal from this handle. The first step involves removing the grommet from the wheel opening and you must take out the Hood Cable. During installation the string must be carried through the ends of the new Hood Cable before both components enter the passenger area where the string will be taken away. Cover the wheel opening with the grommet before installing the Hood Cable to match with the hood release handle. The handle needs three fasteners to secure onto the vehicle body while they should be tightened to 2 nm (18 lb in). After guiding both the Hood Cable and string through the engine compartment remove the string then install the Hood Latch while connecting its cable. Finally, close the hood.