How to replace the Engine Mount Bracket on 2004 Chevrolet Monte Carlo?

Starting the bracket replacement process requires users to disconnect the battery and take off the throttle body air inlet duct. The first step requires removing engine mount struts while raising the vehicle on supports. The removal sequence requires the right Exhaust Manifold's three-way catalytic converter pipe before proceeding to take off the right front wheel and tire and right engine splash shield. First unscrew the bolts that hold the Engine Mount Bracket to the Oil Pan and put on the engine support fixture. Afterward raise the engine into position. You need to remove the engine mount upper nuts before detaching the Engine Mount Bracket from the engine mount. To install the bracket attach it to the engine mount but make sure upper nuts reach a torque of 43 nm (32 ft. Lbs.). Secure the Engine Mount Bracket to the Oil Pan with bolts tight at 58 nm (43 ft. Lbs.). Begin by lowering the vehicle alongside the engine before gradually raising it to put in place the right engine splash shield and right front wheel together with tire. The three-way catalytic converter pipe should be reconnected to the right Exhaust Manifold and then the vehicle must be lowered while engine mount struts are installed before putting back the throttle body air inlet duct and finally attaching the battery ground cable.

OEM 2004 Chevrolet Monte Carlo Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mount Brackets found

View related parts
2004 Chevrolet Monte Carlo Strut Mount
Part Number: 10271462
$191.34 MSRP: $325.75
You Save: $134.41 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Lower Bracket; Strut Front Bracket
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.6 x 6.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10271462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Mount Bracket
Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Monte Carlo Mount Plate, Driver Side
Part Number: 15884396
$0.86 MSRP: $1.35
You Save: $0.49 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop, Engine Mounting; Plate, Engine Mounting
- Position: Driver Side
- Replaces: 10405337
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.9 x 7.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Strut Mount
Part Number: 10232891
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.4 x 4.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10232891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Strut Bracket, Driver Side
Part Number: 24503458
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lift Bracket; Upper Bracket; Strut Front Bracket; Bracket; Bracket, Engine Mounting
- Position: Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.0 x 6.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24503458
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Mount Bracket
Part Number: 10321856
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Bracket
- Replaces: 10243884
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.1 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10321856
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Monte Carlo Strut Bracket, Passenger Side
Part Number: 24507211
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket; Strut Front Bracket
- Position: Passenger Side
- Item Weight: 10.80 Pounds
- Item Dimensions: 12.1 x 8.2 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24507211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Strut Bracket, Passenger Side
Part Number: 24506488
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.2 x 5.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Strut Bracket, Passenger Side
Part Number: 24506489
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Lower Brace
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Mount Plate, Passenger Side
Part Number: 15884384
$10.53 MSRP: $16.49
You Save: $5.96 (37%)
Product Specifications
- Other Name: Plate, Engine Mount; Plate, Engine Mounting
- Position: Passenger Side
- Replaces: 10405336
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 7.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884384
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2004 Chevrolet Monte Carlo Engine Mount Bracket

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Engine Mount Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Engine Mount Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the Engine Mount Bracket on 2004 Chevrolet Monte Carlo?
A: Starting the bracket replacement process requires users to disconnect the battery and take off the throttle body air inlet duct. The first step requires removing engine mount struts while raising the vehicle on supports. The removal sequence requires the right Exhaust Manifold's three-way catalytic converter pipe before proceeding to take off the right front wheel and tire and right engine splash shield. First unscrew the bolts that hold the Engine Mount Bracket to the Oil Pan and put on the engine support fixture. Afterward raise the engine into position. You need to remove the engine mount upper nuts before detaching the Engine Mount Bracket from the engine mount. To install the bracket attach it to the engine mount but make sure upper nuts reach a torque of 43 nm (32 ft. Lbs.). Secure the Engine Mount Bracket to the Oil Pan with bolts tight at 58 nm (43 ft. Lbs.). Begin by lowering the vehicle alongside the engine before gradually raising it to put in place the right engine splash shield and right front wheel together with tire. The three-way catalytic converter pipe should be reconnected to the right Exhaust Manifold and then the vehicle must be lowered while engine mount struts are installed before putting back the throttle body air inlet duct and finally attaching the battery ground cable.

Related 2004 Chevrolet Monte Carlo Parts

Alternate Year Models

2003 Chevrolet Monte Carlo Engine Mount Bracket 2005 Chevrolet Monte Carlo Engine Mount Bracket