Make sure this part fits

GM 24507211
Strut Bracket, Passenger Side

1996-2007 GM

Customer Questions & Expert Answers (16)
GM 24507211 Strut Bracket, Passenger Side
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24507211
    Part DescriptionBracket, Engine Mounting; Engine Mount Bracket; Motor Mount
    Other NamesEngine Bracket; Upper Bracket; Strut Front Bracket
    Item Dimensions12.1 x 8.2 x 6.8 inches
    Item Weight10.80 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24507211
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2004 Buick Regal25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition6 Cyl 3.8 L GAS
    2004-2005 Chevrolet ImpalaBase, LS, SS6 Cyl 3.8 L GAS
    1998-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.8 L GAS
    2004-2005, 1998-1999 Chevrolet Monte CarloLS, LT, SS, Z346 Cyl 3.8 L GAS
    1998-1999 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.8 L GAS
    2004-2007, 1997-2002 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24507211 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24507211 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the support fixtures for the 2001 Buick Regal? Posted by Customer
    A:
    Raise the engine to relieve weight from the engine mount and create slight tension in the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What needs to be detached from the frame for the 2002 Buick Regal? Posted by Customer
    A:
    Detach the power steering oil cooler pipe brackets from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    Why do you need to raise the engine for the 2000 Buick Regal? Posted by Customer
    A:
    To relieve weight from the engine mount and create slight tension in the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after detaching the right engine mount strut for the 2002 Buick Regal? Posted by Customer
    A:
    Remove the lower engine mount strut bracket nut, followed by the lower engine mount strut bracket bolts and the bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the drive belt for the 2004 Buick Regal? Posted by Customer
    A:
    Disconnect the Intake Air Temperature (IAT) sensor electrical connector and remove the air inlet duct from the throttle body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the engine mount struts for the 2001 Buick Regal? Posted by Customer
    A:
    Raise and support the vehicle, then remove the right front tire and wheel, along with the right engine splash shield retainers and splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What conditions should be observed while raising the engine for the 2002 Buick Regal? Posted by Customer
    A:
    Look for the following conditions that would necessitate replacement: heat check cracks on the hard rubber surface, separation of the rubber from the metal plate, or splits through the center of the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What components need to be reinstalled after the engine mount is secured for the 2000 Buick Regal? Posted by Customer
    A:
    Reinstall the A/C compressor bracket bolts, power steering oil cooler pipe brackets, right engine splash shield, catalytic converter, and right front tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine mount be installed for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Attach the engine mount to the engine mount bracket, then install the engine mount upper nuts and tighten them to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Disconnect the battery ground cable and remove the throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you detach the engine mount bracket for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Unscrew the bolts securing the engine mount bracket to the oil pan, install the engine support fixture, and raise the engine. Then, remove the engine mount upper nuts and detach the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after lowering for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Install the engine support fixture to raise the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the torque specification for securing the engine mount bracket to the oil pan for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Tighten the bolts to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the left engine mount strut bracket for the 2001 Buick Regal? Posted by Customer
    A:
    First, drain the cooling system and remove the engine coolant temperature (ECT) sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What components need to be removed next for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the three-way catalytic converter pipe from the right rear exhaust manifold, followed by the right front wheel and tire, and the right engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24507211, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24507211 Strut Bracket, Passenger Side. It is sometimes referred to as GM Engine Mount, GM Engine Mount Bracket, GM Engine Torque Strut Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24507211 Strut Bracket, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery