How to replace the engine flywheel on 2004 Chevrolet Monte Carlo?

The first step for replacing the engine Flywheel requires automatic transaxle removal. The Flywheel holder (J 37096) should be used to lock the Flywheel into place before unscrewing its six engine Flywheel bolts. Use the Flywheel holder (J 37096) to manage the Flywheel then unfasten five of the six crankshaft bolts from their positions except for the bolt positioned at crankshaft rotation's highest point. Minute by minute grip the Flywheel before carefully pulling out the last bolt without dropping the Flywheel. Cleansing of the engine Flywheel retainer holes and bolt threads occurs after the engine Flywheel retainer along with Flywheel removal. Begin installation by placing the Flywheel together with the retainer inside their correct positions then tighten the Flywheel bolts making sure to use Flywheel holder (J 37096) for stopping Flywheel rotation. Wind up the automatic transaxle after setting its bolts with a torque of 71 nm (52 ft. Lbs.).

OEM 2004 Chevrolet Monte Carlo Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Flywheels found

View related parts
2004 Chevrolet Monte Carlo Drive Plate
Part Number: 12579453
$104.78 MSRP: $164.11
You Save: $59.33 (37%)
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel; Plate, Engine Crankshaft
- Replaces: 10218513, 24576876, 24506847
- Item Weight: 6.20 Pounds
- Item Dimensions: 14.1 x 14.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12579453
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Monte Carlo Drive Plate
Part Number: 12609155
$52.46 MSRP: $82.19
You Save: $29.73 (37%)
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Replaces: 24508110, 24505212
- Item Weight: 7.30 Pounds
- Item Dimensions: 14.3 x 14.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12609155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Drive Plate
Part Number: 12609154
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Replaces: 24506809
- Item Weight: 4.30 Pounds
- Item Dimensions: 14.2 x 14.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12609154
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- SS | 6 Cyl 3.8 L GAS

2004 Chevrolet Monte Carlo Flywheel

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Flywheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Flywheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the engine flywheel on 2004 Chevrolet Monte Carlo?
A: The first step for replacing the engine Flywheel requires automatic transaxle removal. The Flywheel holder (J 37096) should be used to lock the Flywheel into place before unscrewing its six engine Flywheel bolts. Use the Flywheel holder (J 37096) to manage the Flywheel then unfasten five of the six crankshaft bolts from their positions except for the bolt positioned at crankshaft rotation's highest point. Minute by minute grip the Flywheel before carefully pulling out the last bolt without dropping the Flywheel. Cleansing of the engine Flywheel retainer holes and bolt threads occurs after the engine Flywheel retainer along with Flywheel removal. Begin installation by placing the Flywheel together with the retainer inside their correct positions then tighten the Flywheel bolts making sure to use Flywheel holder (J 37096) for stopping Flywheel rotation. Wind up the automatic transaxle after setting its bolts with a torque of 71 nm (52 ft. Lbs.).