How to replace the front door lock switch on 2005 Buick LeSabre?

Start by inserting a flat bladed tool beneath the front side of the switch plate before carefully lifting it off from the door trim panel. The electrical connectors will release after pushing forward the switch plate which frees the rear retainer tabs. You can remove the switchpack from the switch plate by using a small flat bladed implement to access its retaining tabs. Before installation connect the electrical connectors to the switchpack then use the rear end of the switch plate to secure the door trim panel. The last step involves pressing down on the switch plate from its front side to activate the retainer clip.

OEM 2005 Buick LeSabre Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Switch found

View related parts
2005 Buick LeSabre Lock Switch
Part Number: 19259952
Product Specifications
- Other Name: Switch, Door Electric And Vacuum Locks; Door Lock Switch
- Replaces: 25654436
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259952
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Door Lock Switch

With a comprehensive array of OEM 2005 Buick LeSabre Door Lock Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Door Lock Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Parts Questions & Experts Answers

Q: How to replace the front door lock switch on 2005 Buick LeSabre?
A: Start by inserting a flat bladed tool beneath the front side of the switch plate before carefully lifting it off from the door trim panel. The electrical connectors will release after pushing forward the switch plate which frees the rear retainer tabs. You can remove the switchpack from the switch plate by using a small flat bladed implement to access its retaining tabs. Before installation connect the electrical connectors to the switchpack then use the rear end of the switch plate to secure the door trim panel. The last step involves pressing down on the switch plate from its front side to activate the retainer clip.