How to Replace Coil Springs on 2005 Buick Park Avenue?

Start the coil spring replacement by using the j 24319-b universal steering linkage puller to disconnect the adjustment link from the knuckle while elevating and sustaining the vehicle and disassembling the tire and wheel. Support the lower Control Arm by placing it on a proper jack then remove each absorber lower retaining bolt and adjustment link retaining nut. The lower Control Arm should sink onto the support assembly while using a pry bar to extract both the spring and the lower spring insulator. You should pull downwards to take off the upper insulator piece. When installing position the upper insulator into the body and the lower insulator into the Control Arm while ensuring the spring rests in the correct position. Position the lower Control Arm upward to install shock absorber lower retaining bolts that require a torque of 24 nm (18 ft. Lbs.) then complete the assembly with an adjustment link retaining nut torque to 50 nm (36 ft. Lbs.). After attaching the adjustment link to the Control Arm you need to reattach the tire and wheel before lowering your vehicle.

OEM 2005 Buick Park Avenue Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coil Springs found

View related parts
2005 Buick Park Avenue Coil Spring, Front
Part Number: 22197216
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22133443
- Item Weight: 6.50 Pounds
- Item Dimensions: 20.4 x 9.0 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22197216
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Coil Spring, Front
Part Number: 22197212
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22132522
- Item Weight: 8.50 Pounds
- Item Dimensions: 15.8 x 7.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22197212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Coil Spring, Rear
Part Number: 25655478
Product Specifications
- Other Name: Spring, Rear; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear
- Replaces: 25693162
- Item Weight: 5.70 Pounds
- Item Dimensions: 11.6 x 7.5 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25655478
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Coil Spring, Rear
Part Number: 25655473
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Replaces: 25633131, 25693160
- Item Weight: 5.80 Pounds
- Item Dimensions: 13.3 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25655473
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2005 Buick Park Avenue Coil Springs

With a comprehensive array of OEM 2005 Buick Park Avenue Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Park Avenue Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Park Avenue Parts Questions & Experts Answers

Q: How to Replace Coil Springs on 2005 Buick Park Avenue?
A: Start the coil spring replacement by using the j 24319-b universal steering linkage puller to disconnect the adjustment link from the knuckle while elevating and sustaining the vehicle and disassembling the tire and wheel. Support the lower Control Arm by placing it on a proper jack then remove each absorber lower retaining bolt and adjustment link retaining nut. The lower Control Arm should sink onto the support assembly while using a pry bar to extract both the spring and the lower spring insulator. You should pull downwards to take off the upper insulator piece. When installing position the upper insulator into the body and the lower insulator into the Control Arm while ensuring the spring rests in the correct position. Position the lower Control Arm upward to install shock absorber lower retaining bolts that require a torque of 24 nm (18 ft. Lbs.) then complete the assembly with an adjustment link retaining nut torque to 50 nm (36 ft. Lbs.). After attaching the adjustment link to the Control Arm you need to reattach the tire and wheel before lowering your vehicle.