What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Buick Park Avenue?

These tools are necessary for servicing and repairing suspension struts: customers need a strut rod nut socket (J 42991) and a strut spring compressor (J 45400) to complete suspension strut work. Strut rod nut socket (J 42991) and strut spring compressor (J 45400). Mount the removed strut into a strut spring compressor (J 45400) device before starting the procedure. Use the compressor forcing screw to turn the device until the coil spring reaches its compression point. A 45 torx® socket should grip the strut shaft as you extract the upper strut mount nut using the strut rod nut socket (J 42991). To extract the strut from the compressor unit tighten the forcing screw before uninstalling both the upper strut mount and coil spring assembly. When assembling the coil spring and upper strut mount into the strut spring compressor (J 45400) compress the spring a second time. Insert the strut and upper strut mount onto the coil spring before installing the strut retaining nut loosely then use the standard 45 torx socket to stabilize the strut shaft during upper strut mount tightening with the strut rod nut socket (J 42991) to 85 nm (63 ft. Lbs.). After removing the strut from the strut spring compressor (J 45400) you must install it back into the vehicle.

How to Replace Rear Coil Springs on Buick Park Avenue?

Suitable vehicle support is crucial at the beginning step of installing a new rear coil spring. First remove the tire and wheel followed by a jack supporting the lower Control Arm. Proceed by removing both absorption lower retaining bolts and the adjustment link retaining nut. The universal steering linkage puller (J 24319-B) helps separate the knuckle from its adjustment link. Lower the suspension until the lower control arm contacts the support assembly. Persons should use a pry bar to peel the lower spring insulator from underneath and extract both the spring and insulator then release the upper insulator through downward pressure. During installation the upper insulator goes inside the body before setting the lower insulator into the Control Arm. Place the spring into position while double-checking that the insulator rests in the correct alignment within the Control Arm. Put the lower Control Arm in its proper position and run the shock-absorbing retaining bolts before applying a torque of 24 nm (18 ft. Lbs.). After tightening the adjustment link nut to 50 nm (36 ft. Lbs.) you should attach the link to the Control Arm. Finish by installing the tire followed by the wheel then slowly lower the vehicle.

OEM Buick Park Avenue Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Coil Springs found

View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 22076852
$95.36
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 22076962, 22076683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Front Part Number: 22078113
$65.88 MSRP: $90.19
You Save: $24.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 10035259
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25523982
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Replaced by: 25523983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25523980
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 25524841, 25524842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25655478
Product Specifications
- Other Name: Spring, Rear; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear
- Replaces: 25693162
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25655473
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Replaces: 25633131, 25693160
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25526963
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 25523983
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 25523982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Front Part Number: 22197216
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22133443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Front Part Number: 22197212
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22132522
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Front Part Number: 22078100
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22078101, 22078115
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Coil Spring, Rear Part Number: 22077130
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 22077131
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Coil Springs

Want to cut long-term maintenance and repair costs? Choose OEM Coil Springs. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Coil Springs includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Park Avenue is considered to be highly reliable and performs well, and there are some of the critical components- Coil Springs. These Coil Springs are vital in carrying the weight of the car and also helping to cushion the movements of the Buick Park Avenue on the road so as to keep the car at its appropriate height. The Coil Springs are also prone to wearing out and this results in a car that has a low ride-height which in turn exhibits saggings and outrageous tire wear, and this greatly affects efficiency as well as safety. Luckily, there is such thing as Replacement Coil Springs avaialble in the market, including various types such as the variable rate and the cargo coils depending on the requirement of the users, whether for bettering handling or increasing traction. To this end, prospects of the Buick Park Avenue can easily get the ideal Coil Springs to fit the model they are driving given the compatibility that is evident. For instance, on some models, coilovers can be adjusted while height of springs is also adjustable enabling the tuning of the precise amount of poo and wheel alignment. Buick Park Avenue is truly a car that is a class above the rest in the market today, especially when it boasts of its rich heritage in luxury and its technical expertize shown in such inventions as the Dynaride which automatically keeps the car at a fixed height by adjusting the rear Coil Springs. This commitment to performance and comfort secures the Buick Park Avenue's position as one of the Full size luxury cars, thus making its Coil Springs a vital part of the empowering the cars performance, as expected by Buick enthusiasts.

Buick Park Avenue Coil Springs Parts and Q&A

Coil Spring, Front
22197216
Q: What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Buick Park Avenue?
A:
These tools are necessary for servicing and repairing suspension struts: customers need a strut rod nut socket (J 42991) and a strut spring compressor (J 45400) to complete suspension strut work. Strut rod nut socket (J 42991) and strut spring compressor (J 45400). Mount the removed strut into a strut spring compressor (J 45400) device before starting the procedure. Use the compressor forcing screw to turn the device until the coil spring reaches its compression point. A 45 torx® socket should grip the strut shaft as you extract the upper strut mount nut using the strut rod nut socket (J 42991). To extract the strut from the compressor unit tighten the forcing screw before uninstalling both the upper strut mount and coil spring assembly. When assembling the coil spring and upper strut mount into the strut spring compressor (J 45400) compress the spring a second time. Insert the strut and upper strut mount onto the coil spring before installing the strut retaining nut loosely then use the standard 45 torx socket to stabilize the strut shaft during upper strut mount tightening with the strut rod nut socket (J 42991) to 85 nm (63 ft. Lbs.). After removing the strut from the strut spring compressor (J 45400) you must install it back into the vehicle.
Coil Spring, Rear
25655478
Q: How to Replace Rear Coil Springs on Buick Park Avenue?
A:
Suitable vehicle support is crucial at the beginning step of installing a new rear coil spring. First remove the tire and wheel followed by a jack supporting the lower Control Arm. Proceed by removing both absorption lower retaining bolts and the adjustment link retaining nut. The universal steering linkage puller (J 24319-B) helps separate the knuckle from its adjustment link. Lower the suspension until the lower control arm contacts the support assembly. Persons should use a pry bar to peel the lower spring insulator from underneath and extract both the spring and insulator then release the upper insulator through downward pressure. During installation the upper insulator goes inside the body before setting the lower insulator into the Control Arm. Place the spring into position while double-checking that the insulator rests in the correct alignment within the Control Arm. Put the lower Control Arm in its proper position and run the shock-absorbing retaining bolts before applying a torque of 24 nm (18 ft. Lbs.). After tightening the adjustment link nut to 50 nm (36 ft. Lbs.) you should attach the link to the Control Arm. Finish by installing the tire followed by the wheel then slowly lower the vehicle.