OEM 2005 Cadillac DeVille Seat Motor

2005 Cadillac DeVille Seat Motor Parts Questions & Experts Answers

• Q: How to replace the Seat Motor on 2005 Cadillac DeVille?

  A: Starting the replacement of seat adjuster motors requires you to disable the SIR system first. The first step involves removing the vehicle seat after which you should detach the seat cushion to reach the seat adjuster motors. Determine which of the three motor components requires replacement either the rear vertical adjuster motor or front vertical adjuster motor or horizontal adjuster motor. The seat adjuster drive cables must be removed from the motor followed by disconnecting the electrical connector. To replace the factory motor inserts you should lay the seat on its back on a clean dry surface after which you can drill out the inserts from the bottom of the seat motor plate using a 3/16 in drill bit. Position the new seat adjuster motor (1,2,3) onto its motor plate and fix it in position through the use of the motor insert which needs to be inserted into the motor grommet of the new motor. The motor attaches to the motor plate through the bolt which should be fastened to 4N.m (36 lb in). Begin by plugging in the electrical connector before putting in position the seat adjuster drive cables. Put back first the seat cushion followed by the seat into its proper vehicle position. Enable the SIR system before conducting any necessary memory seat calibration if system memory functions exist.