How to replace the ignition coil for Bank 1 on 2005 Cadillac XLR?

To replace the Ignition Coil(S) of bank 1, remove the fuel injector sight shield. Pyber it apart electrical connector arnishing junction from coil that is being replaced, then remove ignition coil securing bolt and ignition coil. For installation, make sure that the spark plug seal is secured before you put on the new ignition coil. Secure it to the ignition coil retaining bolt and tighten to 10 N.m (89 lb in); then, connect the ignition coil electrical connector. Finally, replace the fuel injector sight shield.

OEM 2005 Cadillac XLR Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2005 Cadillac XLR Ignition Coil
Part Number: 89017778
$229.42 MSRP: $424.46
You Save: $195.04 (46%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Ignition Control Module; Ignition Module; Coil Assembly; Coil, Ignition Coil
- Replaces: 12585765
- Item Weight: 4.30 Pounds
- Item Dimensions: 18.5 x 10.5 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89017778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base | 8 Cyl 4.6 L GAS

2005 Cadillac XLR Ignition Coil

With a comprehensive array of OEM 2005 Cadillac XLR Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac XLR Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac XLR Parts Questions & Experts Answers

Q: How to replace the ignition coil for Bank 1 on 2005 Cadillac XLR?
A: To replace the Ignition Coil(S) of bank 1, remove the fuel injector sight shield. Pyber it apart electrical connector arnishing junction from coil that is being replaced, then remove ignition coil securing bolt and ignition coil. For installation, make sure that the spark plug seal is secured before you put on the new ignition coil. Secure it to the ignition coil retaining bolt and tighten to 10 N.m (89 lb in); then, connect the ignition coil electrical connector. Finally, replace the fuel injector sight shield.

Related 2005 Cadillac XLR Parts

Alternate Year Models

2004 Cadillac XLR Ignition Coil 2006 Cadillac XLR Ignition Coil