How to replace the MAP Sensor on 2005 Chevrolet Cavalier?

To replace the manifold absolute pressure (MAP) sensor, start by removing the air cleaner outlet resonator and the accelerator cable bracket. Then, the manifold absolute pressure (MAP) sensor harness connector is disconnected, the MAP Sensor from the Intake Manifold is removed, and the seal is examined for deformation. In case the seal is damaged, the MAP Sensor needs to be replaced. Installation- insert the new MAP Sensor in the Intake Manifold using the new MAP Sensor seal provided with the sensor, connect the MAP Sensor harness connector, install the accelerator cable bracket, and finally install the air cleaner outlet resonator.

OEM 2005 Chevrolet Cavalier MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Chevrolet Cavalier M.A.P. Sensor Part Number: 19418807
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS

2005 Chevrolet Cavalier MAP Sensor

With a comprehensive array of OEM 2005 Chevrolet Cavalier MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cavalier MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cavalier MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2005 Chevrolet Cavalier?
A: To replace the manifold absolute pressure (MAP) sensor, start by removing the air cleaner outlet resonator and the accelerator cable bracket. Then, the manifold absolute pressure (MAP) sensor harness connector is disconnected, the MAP Sensor from the Intake Manifold is removed, and the seal is examined for deformation. In case the seal is damaged, the MAP Sensor needs to be replaced. Installation- insert the new MAP Sensor in the Intake Manifold using the new MAP Sensor seal provided with the sensor, connect the MAP Sensor harness connector, install the accelerator cable bracket, and finally install the air cleaner outlet resonator.