How to replace the rear brake line for disc brakes on 2005 Chevrolet Malibu?

In order to change the rear brake hose for the disc brakes, lift and support the vehicle and then remove the rear tire and wheel assembly. Clean the dirt and foreign substance from the ends of the brake hose and the brake pipe fitting. A flare nut wrench is used on the brake coming from the brake pipe, and a back up wrench on the brake on the brake hose to take off the brake hose item and the rear brake from the brake caliper, and takes away the brake hose from the brake caliper. Discard the 2 copper brake hose gaskets that could be glued to the brake caliper or the brake hose end, and cap or plug the holes in the brake caliper and the brake hose to avoid any loss of fluid and contamination. For installation, unscrew the caps or plugs from the apertures while putting in the new copper brake hose gaskets. Fitting two new copper gaskets, the brake hose and the brake hose banjo bolt to the brake caliper, tighten the banjo bolt to 50 nm (37 ft. Lbs. Single the Brake Line's end and the brake hose's end of the brake pipe fitting and retainer and attach the brake hose body bracket to the brake hose and position the brake hose retainer over the anti-rotation tabs of the brake hose . Attach the brake pipe fitting to the brake hose by using a back up wrench on the brake hose and tighten the brake pipe fitting to 20 Nm (15 ft. Lbs.). Make sure that the hose has no contact with any suspension part; if so, take out the hose and fix the situation. Lastly, bleed the hydraulic brake system, placement of the tire and ware assembly, and lower the vehicle.

OEM 2005 Chevrolet Malibu Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2005 Chevrolet Malibu Flex Hose, Green Line, Passenger Side
Part Number: 25874781
$25.21 MSRP: $45.65
You Save: $20.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15806768, 22729635
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 2.1 x 16.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25874781
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Flex Hose, Green Line, Rear
Part Number: 25874786
$34.11 MSRP: $64.80
You Save: $30.69 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15919606, 22729638
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.0 x 1.9 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25874786
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Flex Hose, Green Line, Driver Side
Part Number: 25874780
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 15806767, 22729634
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 2.1 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25874780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Flex Hose
Part Number: 15919605
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaces: 15864127, 22729633
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.3 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15919605
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Flex Hose, Driver Side
Part Number: 15864129
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.6 x 3.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15864129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Flex Hose, Passenger Side
Part Number: 15864128
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.7 x 2.3 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15864128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2005 Chevrolet Malibu Brake Line

With a comprehensive array of OEM 2005 Chevrolet Malibu Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Malibu Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the rear brake line for disc brakes on 2005 Chevrolet Malibu?
A: In order to change the rear brake hose for the disc brakes, lift and support the vehicle and then remove the rear tire and wheel assembly. Clean the dirt and foreign substance from the ends of the brake hose and the brake pipe fitting. A flare nut wrench is used on the brake coming from the brake pipe, and a back up wrench on the brake on the brake hose to take off the brake hose item and the rear brake from the brake caliper, and takes away the brake hose from the brake caliper. Discard the 2 copper brake hose gaskets that could be glued to the brake caliper or the brake hose end, and cap or plug the holes in the brake caliper and the brake hose to avoid any loss of fluid and contamination. For installation, unscrew the caps or plugs from the apertures while putting in the new copper brake hose gaskets. Fitting two new copper gaskets, the brake hose and the brake hose banjo bolt to the brake caliper, tighten the banjo bolt to 50 nm (37 ft. Lbs. Single the Brake Line's end and the brake hose's end of the brake pipe fitting and retainer and attach the brake hose body bracket to the brake hose and position the brake hose retainer over the anti-rotation tabs of the brake hose . Attach the brake pipe fitting to the brake hose by using a back up wrench on the brake hose and tighten the brake pipe fitting to 20 Nm (15 ft. Lbs.). Make sure that the hose has no contact with any suspension part; if so, take out the hose and fix the situation. Lastly, bleed the hydraulic brake system, placement of the tire and ware assembly, and lower the vehicle.