OEM 2005 Chevrolet Monte Carlo Fuel Injector

2005 Chevrolet Monte Carlo Fuel Injector Parts Questions & Experts Answers

• Q: How to clean fuel injectors effectively on 2005 Chevrolet Monte Carlo?

  A: The tools needed for Fuel Injector cleaning include j 37287 (Fuel Line Shut-Off Adapters), j 35800-a (Fuel Injector Cleaner), j 42873-1 (3/8 Fuel Line Shut-Off Valve), j 42873-2 (5/16 Return Pipe Shut-Off Valve), j 42964-1 (3/8 Fuel Pipe Shut-Off Valve) and j 42964-2 (5/16 Fuel Pipe Shut-Off Valve). Use gm top-engine cleaner product p/n 12346535 for us dealers along with p/n 992872 for canadian dealers in a 10 percent cleaning solution concentration. The recommended quantity for us dealers is to empty two 24 ml containers into the j 35800-a tool while canadian dealers should measure and fill the same tool with 48 ml. A mixture of 96 ml top-engine cleaner with 864 ml regular unleaded gasoline should be used when not using this specific brand of cleaner. Use electrical disablers to stop the Fuel Pump during a procedure that needs disconnecting fuel lines from the rail and their plugging with appropriate stoppings. The j 35800-a needs connection to the Fuel Rail to achieve 510 kpa (75 psi) pressure before running the engine until it stalls. The j 35800-a needs to be disconnected before refitting the Fuel Pump relay and lines after which the vehicle should be idled for two minutes to drain excess cleaner. Use the j 35800-a to measure pressure drops from each injector while testing for balance and replace the unit with lowest pressure drop that measures in excess of 15 kpa (2 psi). The customer should insert one ounce of port Fuel Injector cleaner, gm p/n 12345104 (Canadian P/N 10953467), for each gallon of gasoline in the fuel tank following the first dose instructions for completing the next fill-up. Gm port Fuel Injector cleaner should be used every 5000 km (3,000 mi) cycles to maintain injector cleanliness. Take the test drive to ensure the customer problem has successfully been addressed.