How to clean fuel injectors on Chevrolet Monte Carlo?

A complete set of cleaning tools consists of the following: Fuel Line Shut-Off Adapters (J 37287), Fuel Injector Cleaner (J 38500-A), 3/8 Fuel Line Shut-Off Adapter (J 42873-1), 5/16 Fuel Line Shut-Off Adapter (J 42873-2), 3/8 Fuel Line Shut-Off Adapter (J 42964-1) and 5/16 Fuel Line Shut-Off Adapter (J 42964-2). Top-Engine Cleaner (GM P/N 12346535 for US dealers or Canadian P/N 992872 for Canadian dealers) serves as the sole approved cleaning agent when performing this task under strict conditions which exclude adding it to the fuel tank and limit concentration to 10 percent. A total amount of 960 ml cleaning solution needs preparation using normal unleaded gasoline to fill up the injector cleaning tank. The procedure requires you to disable fuel pump operations followed by disconnecting fuel lines properly after plugging them securely. The cleaning tool needs fuel rail connection before pressure activation and engine operation until it stalls. Once the tool is disconnected rejoin the fuel lines then let the engine run an extra 2 minutes. The Injector Balance Test must be performed before exchanging any defective injectors which exhibit more than 15 kPa (2 psi) pressure loss. The last step requires adding one ounce of Port Fuel Injector Cleaner (GM P/N 12345104 or Canadian P/N 10953467) per tank-gallon to prevent future problems when you should use this regularly. Test the vehicle on the road to verify the customer concern has been addressed.

How to replace a fuel injector on Chevrolet Monte Carlo?

The first step to replace the Fuel Injector starts with Fuel Rail removal while being cautious to protect both pins of the electrical connector and injector nozzles from damage. Never submerge the injector into cleaning solutions because it functions as an electric component. Fuel leaks in the injector may lead to contaminated engine oil. The procedure starts with Fuel Injector retaining clip removal which precedes Fuel Injector extraction from the Fuel Rail before upper and lower o-rings can be taken out. The o-rings of upper and lower o-ring must be positioned on the Fuel Injector before reinstalling the injector into the Fuel Rail with the retaining clip. To complete the repair the repairman should install the Fuel Rail before inspecting fuel leakage by following this procedure: turn on the ignition for two seconds then off for ten seconds before re-engaging the ignition for inspection.

OEM Chevrolet Monte Carlo Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fuel Injectors found

View related parts
Chevrolet Monte Carlo Injector Part Number: 17111468
$150.31 MSRP: $269.62
You Save: $119.31 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector
- Replaced by: 19110532
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 19244620
$121.79 MSRP: $228.72
You Save: $106.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Kit, Fuel Injection; Fuel Injector
- Replaces: 17113572, 17120262, 17107267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 12592648
$57.50 MSRP: $161.92
You Save: $104.42 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly-Sequential Multiport Fuel; Fuel Injector; Injector, Fuel Injection
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 12586554
$80.27 MSRP: $225.98
You Save: $145.71 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector, Fuel Injection; Fuel Injector
- Replaces: 17113623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 89017704
$90.23 MSRP: $163.32
You Save: $73.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Kit, Fuel Injection; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Fuel Injector Kit Part Number: 24508208
Product Specifications
- Other Name: Injector Assembly-Sequential Multiport Fuel; Gasoline Injector; Fuel Injector; Injector; Injector, Fuel Injection
- Replaces: 24507495, 24503406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fuel Injector Kit Part Number: 24503226
Product Specifications
- Other Name: Injector Assembly-Sequential Multiport Fuel; Fuel Injector; Injector; Injector, Fuel Injection
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 17113317
Product Specifications
- Other Name: Injector Kit, Multiport Fuel; Fuel Injector; Injector Kit, Fuel Injection
- Replaces: 17121966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 17090849
Product Specifications
- Other Name: Injector Kit, Multiport Fuel; Fuel Injector; Injector Kit, Fuel Injection
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Injector Part Number: 12586551
Product Specifications
- Other Name: Injector Assembly-Sequential Multiport Fuel; Fuel Injector; Injector Kit, Fuel Injection; Injector, Fuel Injection
- Replaces: 17113611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Fuel Injector

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Injector. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Fuel Injector includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Fuel Injector of Chevrolet Monte Carlo cars is one of the leading parts of the car that pumps fuel directly into the cylinders under the instruction of the Engine Control Module. This system being called as "returnless" decreases the fuel lines and provides the optimal air-fuel ratio for the engine. If the specific injectors are not working efficiently, this results in a poor idle, low power outputs, and affected catalytic converters and oxygen sensors. Therefore for better operation of the vehicle it is useful to replace faulty fuel injector in good time. The Fuel Injector is the other important invention that replaced the carburetor to regulate the fuel supply to the engine in a more efficient way.

Chevrolet Monte Carlo Fuel Injector Parts and Q&A

Injector
12586554
Q: How to clean fuel injectors on Chevrolet Monte Carlo?
A:
A complete set of cleaning tools consists of the following: Fuel Line Shut-Off Adapters (J 37287), Fuel Injector Cleaner (J 38500-A), 3/8 Fuel Line Shut-Off Adapter (J 42873-1), 5/16 Fuel Line Shut-Off Adapter (J 42873-2), 3/8 Fuel Line Shut-Off Adapter (J 42964-1) and 5/16 Fuel Line Shut-Off Adapter (J 42964-2). Top-Engine Cleaner (GM P/N 12346535 for US dealers or Canadian P/N 992872 for Canadian dealers) serves as the sole approved cleaning agent when performing this task under strict conditions which exclude adding it to the fuel tank and limit concentration to 10 percent. A total amount of 960 ml cleaning solution needs preparation using normal unleaded gasoline to fill up the injector cleaning tank. The procedure requires you to disable fuel pump operations followed by disconnecting fuel lines properly after plugging them securely. The cleaning tool needs fuel rail connection before pressure activation and engine operation until it stalls. Once the tool is disconnected rejoin the fuel lines then let the engine run an extra 2 minutes. The Injector Balance Test must be performed before exchanging any defective injectors which exhibit more than 15 kPa (2 psi) pressure loss. The last step requires adding one ounce of Port Fuel Injector Cleaner (GM P/N 12345104 or Canadian P/N 10953467) per tank-gallon to prevent future problems when you should use this regularly. Test the vehicle on the road to verify the customer concern has been addressed.
Fuel Injector Kit
24508208
Q: How to replace a fuel injector on Chevrolet Monte Carlo?
A:
The first step to replace the Fuel Injector starts with Fuel Rail removal while being cautious to protect both pins of the electrical connector and injector nozzles from damage. Never submerge the injector into cleaning solutions because it functions as an electric component. Fuel leaks in the injector may lead to contaminated engine oil. The procedure starts with Fuel Injector retaining clip removal which precedes Fuel Injector extraction from the Fuel Rail before upper and lower o-rings can be taken out. The o-rings of upper and lower o-ring must be positioned on the Fuel Injector before reinstalling the injector into the Fuel Rail with the retaining clip. To complete the repair the repairman should install the Fuel Rail before inspecting fuel leakage by following this procedure: turn on the ignition for two seconds then off for ten seconds before re-engaging the ignition for inspection.