How to replace the intermediate steering shaft on 2005 Chevrolet Monte Carlo?

You must lift and fixture the vehicle before starting the intermediate Steering Shaft replacement process. The tire and wheel assembly needs removal before front wheel straightening and Steering Column locking happens to avoid suffering from improper alignment and sir coil assembly damage. Begin installation of the Steering Column anti-rotation pin (J 42640) at the bottom of the Steering Column before using the intermediate Steering Shaft seal to reach the lower pinch bolt. First remove the power steering gear stub shaft's lower pinch bolt before detaching its intermediate Steering Shaft. Lower the vehicle before removing the left instrument panel insulator. Use the Steering Shaft intermediate seal to access the upper pinch bolt before you detach it to disconnect the intermediate Steering Shaft from the Steering Column. Place the intermediate Steering Shaft into position then tighten the upper pinch bolt to 48 nm (35 ft. Lbs.). After positioning the intermediate Steering Shaft seal on the Steering Column you can raise the vehicle for support to link the intermediate Steering Shaft with the power steering gear stub shaft. The lower pinch bolt must be tightened to 48 nm (35 ft. Lbs.) during installation. Remove the Steering Column anti-rotation pin (J 42640) before installing the intermediate Steering Shaft seal onto the power steering gear and reattaching the tire and wheel assembly. After lowering the vehicle, install the left instrument panel insulator.

OEM 2005 Chevrolet Monte Carlo Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Shafts found

View related parts
2005 Chevrolet Monte Carlo Lower Shaft
Part Number: 26044730
$9.96 MSRP: $148.19
You Save: $138.23 (94%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Lower Steering; Steering Shaft; Shaft; Shaft, Steering Column
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.0 x 4.0 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26044730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Lower Shaft
Part Number: 19179923
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Steering Shaft; Intermed Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 26079240, 25829294, 10327502, 10376430
- Item Weight: 4.30 Pounds
- Item Dimensions: 4.2 x 4.1 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19179923
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Intermediate Shaft
Part Number: 19179922
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Steering Shaft; Coupling Shaft; Lower Shaft; Intermed Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 10376429, 26078302, 26057715, 26055042, 10327501, 26062673, 25829293
- Item Weight: 2.40 Pounds
- Item Dimensions: 4.2 x 4.1 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19179922
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Steering Shaft
Part Number: 26064247
Product Specifications
- Other Name: Shaft, Steering Column; Shaft Assembly; Upper Shaft; Shaft
- Position: Upper
- Replaces: 26036514
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.2 x 5.4 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2005 Chevrolet Monte Carlo Steering Shaft

With a comprehensive array of OEM 2005 Chevrolet Monte Carlo Steering Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Monte Carlo Steering Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Monte Carlo Steering Shaft Parts Questions & Experts Answers

Q: How to replace the intermediate steering shaft on 2005 Chevrolet Monte Carlo?
A: You must lift and fixture the vehicle before starting the intermediate Steering Shaft replacement process. The tire and wheel assembly needs removal before front wheel straightening and Steering Column locking happens to avoid suffering from improper alignment and sir coil assembly damage. Begin installation of the Steering Column anti-rotation pin (J 42640) at the bottom of the Steering Column before using the intermediate Steering Shaft seal to reach the lower pinch bolt. First remove the power steering gear stub shaft's lower pinch bolt before detaching its intermediate Steering Shaft. Lower the vehicle before removing the left instrument panel insulator. Use the Steering Shaft intermediate seal to access the upper pinch bolt before you detach it to disconnect the intermediate Steering Shaft from the Steering Column. Place the intermediate Steering Shaft into position then tighten the upper pinch bolt to 48 nm (35 ft. Lbs.). After positioning the intermediate Steering Shaft seal on the Steering Column you can raise the vehicle for support to link the intermediate Steering Shaft with the power steering gear stub shaft. The lower pinch bolt must be tightened to 48 nm (35 ft. Lbs.) during installation. Remove the Steering Column anti-rotation pin (J 42640) before installing the intermediate Steering Shaft seal onto the power steering gear and reattaching the tire and wheel assembly. After lowering the vehicle, install the left instrument panel insulator.