How to replace the Power Steering Hose on 2005 Chevrolet Monte Carlo?

The first step to replace the power steering cooler pipe/hose requires decoupling engine mount struts from the engine while raising and supporting the vehicle. First remove the tire along with wheel assembly before placing a drain pan beneath the vehicle. The sir coil assembly can be harmed if you disconnect the Steering Column or intermediate shaft before placing the front wheels in a straight position and turning the Steering Column to lock. The intermediate Steering Shaft should be detached from the power steering gear stub shaft before attaching it to a utility stand for frame support. When removing the frame bolts from behind the frame keep a safe distance by not letting the frame fall beyond an appropriate level to protect engine parts. First lower the frame with a utility stand before accessing it. Then remove the power steering return hose linking the Power Steering Pump and power steering cooler pipe before separating the power steering return line from the power steering gear with its clamp. Open the power steering cooler pipe retaining clips at first before pulling the power steering cooler pipe free from vehicle access. Secure the new power steering cooler pipe to its position by using the retaining clips. Connect the power steering return hose from the Power Steering Pump to the cooler pipe when you attach the power steering return line to the power steering gear and its clamp. The utility stand helps lift the frame before you install new frame bolts at its rear section. The intermediate Steering Shaft should be reconnected to the power steering gear stub shaft while the tire and wheel assembly gets reinstalled and the drain pan gets removed. The last steps include lowering the vehicle and reinstalling the engine mount struts followed by fluid filling of the power steering reservoir. Then comes system bleeding followed by checking for leaks.

OEM 2005 Chevrolet Monte Carlo Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2005 Chevrolet Monte Carlo Power Steering Pressure Hose
Part Number: 21993842
$46.95 MSRP: $76.84
You Save: $29.89 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.1 x 20.0 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21993842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Monte Carlo Power Steering Cooler Tube
Part Number: 10306242
$79.61 MSRP: $131.14
You Save: $51.53 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler
- Item Weight: 5.30 Pounds
- Item Dimensions: 35.4 x 20.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Power Steering Return Hose
Part Number: 26077754
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.7 x 5.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26077754
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Monte Carlo Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Monte Carlo Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2005 Chevrolet Monte Carlo Power Steering Hose

With a comprehensive array of OEM 2005 Chevrolet Monte Carlo Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Monte Carlo Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the Power Steering Hose on 2005 Chevrolet Monte Carlo?
A: The first step to replace the power steering cooler pipe/hose requires decoupling engine mount struts from the engine while raising and supporting the vehicle. First remove the tire along with wheel assembly before placing a drain pan beneath the vehicle. The sir coil assembly can be harmed if you disconnect the Steering Column or intermediate shaft before placing the front wheels in a straight position and turning the Steering Column to lock. The intermediate Steering Shaft should be detached from the power steering gear stub shaft before attaching it to a utility stand for frame support. When removing the frame bolts from behind the frame keep a safe distance by not letting the frame fall beyond an appropriate level to protect engine parts. First lower the frame with a utility stand before accessing it. Then remove the power steering return hose linking the Power Steering Pump and power steering cooler pipe before separating the power steering return line from the power steering gear with its clamp. Open the power steering cooler pipe retaining clips at first before pulling the power steering cooler pipe free from vehicle access. Secure the new power steering cooler pipe to its position by using the retaining clips. Connect the power steering return hose from the Power Steering Pump to the cooler pipe when you attach the power steering return line to the power steering gear and its clamp. The utility stand helps lift the frame before you install new frame bolts at its rear section. The intermediate Steering Shaft should be reconnected to the power steering gear stub shaft while the tire and wheel assembly gets reinstalled and the drain pan gets removed. The last steps include lowering the vehicle and reinstalling the engine mount struts followed by fluid filling of the power steering reservoir. Then comes system bleeding followed by checking for leaks.