How to replace the front Wheel Speed Sensor (WSS) on 4 Wheel Drive on 2005 Chevrolet Tahoe?

Support the vehicle when lifted and take out its wheel before you exchange the front wss for 4 wheel drive systems. Unbolt the brake rotor from the specified 1500 series equipment. Clean all attachment points of the wss cable clip before disconnecting it from the frame, knuckle, and upper Control Arm. Remove the electrical connector from the wss cable. Gently uninstall the wss from the hub/bearing unit in 2500/3500 trucks by pulling it out without prying to preserve the sensor body integrity. When installing the new wss you need to block debris entry, brush the hub surface clean, apply a thin coat of specification spray gm p/n 01051344 to hub and sensor areas. Install the wss into the hub/bearing assembly with flat alignment, secure the wss mounting bolt at 18 nm (13 ft. Lbs.). Reconnect the wss mounting clips to proper locations on suspension and frame then link the wss electrical connector after putting back the brake rotor on 1500 models before restoring tire and wheel and running diagnostic system check on the vehicle.

OEM 2005 Chevrolet Tahoe Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Speed Sensors found

View related parts
2005 Chevrolet Tahoe ABS Sensor, Front
Part Number: 15233108
$34.44 MSRP: $64.68
You Save: $30.24 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Front Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Trim Panel; Front Speed Sensor; Sensor, Electronic Brake Control
- Position: Front
- Replaced by: 84356646
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.3 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Tahoe Speed Sensor
Part Number: 24225896
$30.84 MSRP: $50.80
You Save: $19.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Vehicle Speed Sensor; ABS Sensor; Sensor, Computer Control Sensors; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 10456520, 10456194
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24225896
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Tahoe Vehicle Speed Sensor
Part Number: 19302667
$45.64 MSRP: $88.57
You Save: $42.93 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Speedometer Driven; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 12376520, 88984527
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2005 Chevrolet Tahoe Wheel Speed Sensor

With a comprehensive array of OEM 2005 Chevrolet Tahoe Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Tahoe Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Tahoe Parts Questions & Experts Answers

Q: How to replace the front Wheel Speed Sensor (WSS) on 4 Wheel Drive on 2005 Chevrolet Tahoe?
A: Support the vehicle when lifted and take out its wheel before you exchange the front wss for 4 wheel drive systems. Unbolt the brake rotor from the specified 1500 series equipment. Clean all attachment points of the wss cable clip before disconnecting it from the frame, knuckle, and upper Control Arm. Remove the electrical connector from the wss cable. Gently uninstall the wss from the hub/bearing unit in 2500/3500 trucks by pulling it out without prying to preserve the sensor body integrity. When installing the new wss you need to block debris entry, brush the hub surface clean, apply a thin coat of specification spray gm p/n 01051344 to hub and sensor areas. Install the wss into the hub/bearing assembly with flat alignment, secure the wss mounting bolt at 18 nm (13 ft. Lbs.). Reconnect the wss mounting clips to proper locations on suspension and frame then link the wss electrical connector after putting back the brake rotor on 1500 models before restoring tire and wheel and running diagnostic system check on the vehicle.