Other Name: Sensor, Front Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Trim Panel; Front Speed Sensor; Sensor, Electronic Brake Control
Position: Front
Replaced by: 84356646
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Other Name: Sensor Assembly-Rear Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Rear Speed Sensor; Sensor, Electronic Brake Control
Position: Rear
Replaces: 15121067
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Sensor Assembly-Front Wheel Speed; ABS Wheel Speed Sensor; Wheel Speed Sensor; Front Speed Sensor; Sensor Kit, Electronic Brake Control
Position: Front
Replaces: 22870821, 15229012, 22740468
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Chevrolet Tahoe Wheel Speed Sensor
Our website offers an extensive catalog of genuine Chevrolet Tahoe Wheel Speed Sensor at unbeatable prices. Every OEM Chevrolet Tahoe Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe Wheel Speed Sensor Parts Questions & Experts Answers
Q: How to replace the rear wheel speed sensor and ensure its proper functioning on Chevrolet Tahoe?
A: Before starting work raise the vehicle and disconnect its electrical connection so you can replace the sensor. Turn off the wheel speed sensor by removing its bolt and pulling out the sensor. Insert the wheel speed sensor until it reaches full seating and fasten it using the supplied wheel speed sensor retaining bolt tightened to 13 Nm (115 inch lbs). Join the electrical connector after putting the vehicle back on the ground. Ensure the wheel speed sensor functions correctly by starting the engine with engine idling and observing that ABS or traction assist light remains lit. Keep driving the vehicle only when both lamp indicators go off during diagnostic repair. Inspect the wheel speed sensor electrical connector for breaks and correct connection before starting the vehicle again. Test the antilock brake system symptoms when the lamp continues to display. Travel on a smooth paving with no traffic using a steady drive at 16 km/h (10 mph) for at least 5 seconds. Inspect the indicators for both ABS and traction assist after stopping your drive. If either light shows up search for the diagnostic beginning point of your Anti-Lock Brake System in the vehicle manual.