OEM 2006 Buick Rendezvous Muffler

2006 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the muffler on 2006 Buick Rendezvous?

  A: Follow this Muffler replacement procedure by first supporting the vehicle then adding a utility stand beneath the Catalytic Converter to prevent vertical motion that exceeds a limit of 6 degrees at the converter's rear end. Pull out the bolts that connect the Muffler to the Catalytic Converter before throwing away the Catalytic Converter gasket. Take out the Exhaust Hanger insulators from all underbody exhaust hangers. To work on all-wheel-drive-equipped vehicles utilize a utility stand to both lower and support the crossmember. Clean both the Catalytic Converter flange and the Muffler flange by moving the Muffler to the vehicle's front position. Position the Muffler over the rear axle with a rearward orientation while you install hanger insulators to the Muffler assembly. Install Exhaust Hanger insulators to underbody exhaust hangers before proceeding. The utility stand becomes necessary for crossmember installation when awd exists. Set a new Catalytic Converter gasket in place afterward secure the Catalytic Converter to Muffler bolts while tightening them to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.