Make sure this part fits

GM 15252916
Muffler & Pipe

2004-2007 Buick Rendezvous

Customer Questions & Expert Answers (7)
GM 15252916 Muffler & Pipe
  • Part Description
    Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
  • Manufacturer
    General Motors
Make sure this part fits
$516.58 MSRP: $775.81
You Save: $259.23 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15252916
    Part DescriptionMuffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
    Other NamesMuffler
    Item Dimensions82.8 x 14.1 x 9.3 inches
    Item Weight38.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15252916
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15252916 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15252916 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the muffler in a with all-wheel drive (AWD) on Buick Rendezvous? Posted by Customer
    A:
    To replace the Muffler, first, take off the spare tire if the vehicle has an all-wheel drive (AWD), and raise and support the vehicle. Add a utility stand underneath the Catalytic Converter for supportive purposes making sure there is not more than 6 degrees of vertical movement at the rear part of Catalytic Converter assembly. Remove the Catalytic Converter to Muffler bolts and throw away the Catalytic Converter Gasket. If you have equipped this car with awd, also remove the spare tire heat shield and the exhaust hanger insulators from the underbody exhaust hangers. Then support and lower the cross member using a utility stand if needed and remove Muffler towards the front of the vehicle. Clean the flange of the Catalytic Converter and the Muffler and have the insulators of the hanger removed from the Muffler assembly. For installation attach the hanger insulators of the Muffler assembly, align the Muffler on the rear axle and towards the rear of the vehicle attach the exhaust hanger insulators on the underbody hangers. If awd is available: raise and install the crossmember with the util. Stand, reinstall spare tire heat shield. Put in new Catalytic Converter Gasket and tighten Catalytic Converter to Muffler bolts to 45 n.m (33 lb ft). Finally, lower the vehicle and reinstall the spare tire if has awd.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the last step in the process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Muffler
    Q:
    What should be done with the exhaust hanger insulators for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Install the exhaust hanger insulators to the underbody exhaust hangers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Muffler
    Q:
    What is the next step after removing the radiator inlet hose for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Take out the exhaust crossover pipe heat shield bolts and the heat shield itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the torque specification for securing the exhaust crossover pipe nuts for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Secure the exhaust crossover pipe nuts to a torque of 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the first step to replace the Exhaust Crossover Pipe (LA1) for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15252916, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15252916 Muffler & Pipe. It is sometimes referred to as GM Exhaust Pipe, GM Muffler. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15252916 Muffler & Pipe. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery