OEM 2006 Chevrolet SSR Seat Heater Pad

2006 Chevrolet SSR Seat Heater Pad Parts Questions & Experts Answers

• Q: How to replace the front seat back Seat Heater Pad on 2006 Chevrolet SSR?

  A: A person should start by removing the car seat before they begin replacing the front seat back heater element. Begin by taking off the chrome head restraint trim from the headrest before removing the seat back release handle together with the seat belt guide. Detach the seat back panel retaining tabs which run from the panel sides to its base before you can separate the left and right seat back cushion side bolster panels. Continue by taking off the seat back panel after you remove the seat back cover tabs which surround both the upper seat back panel and inside of the head restraint support. Uncover the seat back assembly and remove its cushion and cover next before detaching the hog rings which secure the seat cover to the foam cushion and finally take off the cover from the cushion. The heater element should be pulled off the pad as you guide the heater element electrical harness through the hole. Place the heater element electrical harness through the hole in the pad and apply the adhesive-backed heater element to the pad surface. Attach the cover to the cushion through the application of hog rings then reinstall both components back onto the seat back assembly. Secure the back cover tabs against the inside of the head restraint support before replacing the seat back panel. You should first secure the left and right seat back cushion side bolster panels to the seat back before attaching the seat back cover retainer tabs that circle both sides and lower edge. The procedure requires attaching seat back cover tabs to the upper seat back panel followed by seat belt guide and seat back release handle installation and finally completing with chrome head restraint trim to the headrest before vehicle seat reinstallation.