OEM 2006 Chevrolet Uplander Brake Caliper Bracket

2006 Chevrolet Uplander Brake Caliper Bracket Parts Questions & Experts Answers

• Q: How to replace the front brake caliper bracket on 2006 Chevrolet Uplander?

  A: Install heavy mechanics wire to carry the brake caliper during replacement but keep the brake flexible hose connected. Unscrew the brake pads then the pads retainers out of the caliper bracket assembly before removing the caliper bracket bolts. Brush threaded bolts with wire to take off residue thread locker and junk before removing both pieces of the brake caliper support and the mounting bolt boots. Check the Brake Caliper Bracket for damage then clean its contact surface and Brake Pad area using a wire brush. Position the Brake Caliper Bracket first and check both the threaded bolts and knuckle mounting holes for proper cleanliness and quality. Use gm p/n 12345493 or a substitute on the threads of Brake Caliper Bracket bolts prior to installing them at 185 nm torque measurement (137 ft lbs). Install the Brake Pad retainers on the Brake Caliper Bracket and apply silicone brake lubricant to all contact spots. After servicing the boots, mount them on the caliper bracket. Set the brake pads on the Brake Caliper Bracket and properly position the brake caliper.