How to replace the rear axle shaft on 2006 GMC Envoy?

The first step toward rear Axle Shaft replacement starts by lifting the vehicle and removing its wheel and tire. Proceed with breaking caliper removal as well. Start by removing the rear axle housing cover together with its gasket before disconnecting the pinion shaft locking bolt. Rear axle shafts without Differential locking must have their pinion shafts removed. You should partially remove the shaft of vehicles with locking differentials to rotate the case until the pinion shaft makes contact with the housing. To extract the Axle Shaft use a screwdriver for c-lock rotation until it reaches the thrust block position. Then push the Axle Shaft flange toward the Differential while removing the c-lock from the Axle Shaft opening to proceed with shaft removal by avoiding any shaft rotation to prevent gear misalignment. When installing the Axle Shaft into the rear axle housing ensure that the Differential side gear receives the splines without damaging the seal. You must apply the c-lock to the button end of an Axle Shaft that lacks a locking Differential function. When operating a locking Differential users need to keep the pinion shaft partially protruding and apply the c-lock to the Axle Shaft until both ends meet the thrust block. Sitting the c-lock inside the Differential gear requires flange shaft extension until positioning the pinion shaft hole with the Differential case bolt hole. After installing a new pinion shaft locking bolt, tighten it to 36 nm (27 ft. Lbs.). The last steps include installing the rear axle housing cover with gasket and brake caliper and tire and wheel assembly while filling it with planned axle lubricant before lowering the vehicle.

OEM 2006 GMC Envoy Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Axle Shafts found

View related parts
2006 GMC Envoy Intermediate Shaft, Front Part Number: 12479125
$376.93 MSRP: $593.06
You Save: $216.13 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Axle Shafts; Intermed Shaft
- Position: Front
- Item Weight: 4.70 Pounds
- Item Dimensions: 13.5 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12479125
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft Part Number: 88965787
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Axle
- Position: Rear
- Item Weight: 32.30 Pounds
- Item Dimensions: 40.9 x 10.8 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft Part Number: 88965786
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Axle
- Position: Rear
- Item Weight: 27.00 Pounds
- Item Dimensions: 48.8 x 11.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965786
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft, Rear Passenger Side Part Number: 19133413
Product Specifications
- Other Name: Shaft, Rear Axle (Right-Hand); Axle Shafts; Axle; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 12479161
- Item Weight: 19.30 Pounds
- Item Dimensions: 34.0 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133413
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Assembly, Rear Part Number: 25926158
Product Specifications
- Other Name: Axle Assembly-Rear (4.10 Ratio); Axle Shaft
- Position: Rear
- Replaces: 15842180
- Item Weight: 88.20 Pounds
- Item Dimensions: 71.0 x 20.3 x 13.9 inches
- Condition: New
- SKU: 25926158
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Assembly, Front Part Number: 26079789
$390.96 MSRP: $615.16
You Save: $224.20 (37%)
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Axle
- Position: Front
- Item Weight: 19.80 Pounds
- Item Dimensions: 5.2 x 5.2 x 36.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26079789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Assembly, Rear Part Number: 15939021
Product Specifications
- Other Name: Axle Assembly-Rear (4.10 Ratio); Axle Shaft; Axle, Rear Axle
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15939021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft, Rear Passenger Side Part Number: 19133410
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Passenger Side
- Replaces: 12479017
- Item Weight: 19.80 Pounds
- Item Dimensions: 34.0 x 6.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft, Rear Driver Side Part Number: 19133409
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Driver Side
- Replaces: 12479016
- Item Weight: 19.40 Pounds
- Item Dimensions: 34.3 x 6.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Axle Shaft, Rear Driver Side Part Number: 19133412
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Axle
- Position: Rear Driver Side
- Replaces: 12479160
- Item Weight: 19.70 Pounds
- Item Dimensions: 33.9 x 7.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2006 GMC Envoy Axle Shaft

With a comprehensive array of OEM 2006 GMC Envoy Axle Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Envoy Axle Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 GMC Envoy Axle Shaft Parts and Q&A

Q: How to replace the rear axle shaft on 2006 GMC Envoy?
A: The first step toward rear Axle Shaft replacement starts by lifting the vehicle and removing its wheel and tire. Proceed with breaking caliper removal as well. Start by removing the rear axle housing cover together with its gasket before disconnecting the pinion shaft locking bolt. Rear axle shafts without Differential locking must have their pinion shafts removed. You should partially remove the shaft of vehicles with locking differentials to rotate the case until the pinion shaft makes contact with the housing. To extract the Axle Shaft use a screwdriver for c-lock rotation until it reaches the thrust block position. Then push the Axle Shaft flange toward the Differential while removing the c-lock from the Axle Shaft opening to proceed with shaft removal by avoiding any shaft rotation to prevent gear misalignment. When installing the Axle Shaft into the rear axle housing ensure that the Differential side gear receives the splines without damaging the seal. You must apply the c-lock to the button end of an Axle Shaft that lacks a locking Differential function. When operating a locking Differential users need to keep the pinion shaft partially protruding and apply the c-lock to the Axle Shaft until both ends meet the thrust block. Sitting the c-lock inside the Differential gear requires flange shaft extension until positioning the pinion shaft hole with the Differential case bolt hole. After installing a new pinion shaft locking bolt, tighten it to 36 nm (27 ft. Lbs.). The last steps include installing the rear axle housing cover with gasket and brake caliper and tire and wheel assembly while filling it with planned axle lubricant before lowering the vehicle.