How to replace the engine mount on 2007 Buick Terraza?

The replacement of an Engine Mount requires removal of the air cleaner outlet duct alongside Engine Mount struts and the subsequent raising and supporting of the vehicle. Begin by removing the Catalytic Converter while simultaneously removing the right front wheel with tire along with the right engine splash shield. Strikes a balance between the Oil Pan and jack support by using a block of wood then proceed to remove Engine Mount to frame nuts. A combination of utility stand and block of wood placed under the Oil Pan will raise the engine while technicians remove the Engine Mount bracket to Oil Pan bolts before extracting the Engine Mount and bracket. Separate the Engine Mount bracket from its nuts and finally take out the mount from its bracket. The installation process begins with attaching the Engine Mount to the bracket and proceeding to tighten the Engine Mount bracket to Engine Mount nuts at 50 n.m (37 lb ft). First secure the Engine Mount together with the Oil Pan followed by tightening the Engine Mount bracket to Oil Pan bolts up to 58 n.m (43 lb ft). Place the engine on the utility stand before attaching the frame nuts to the Engine Mount while tightening them to 47 n.m (35 lb ft). After the right engine splash shield installation you must reinstall the right front wheel and tire and Catalytic Converter before lowering the vehicle to mount struts and reattach the air cleaner outlet duct.

OEM 2007 Buick Terraza Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2007 Buick Terraza Strut
Part Number: 10345905
$77.89 MSRP: $132.61
You Save: $54.72 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.4 x 5.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Strut Bracket
Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.1 x 4.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10274661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Mount Bracket
Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Strut Bracket, Passenger Side
Part Number: 12577766
$24.60 MSRP: $40.55
You Save: $15.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.4 x 4.3 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Strut
Part Number: 10247084
$52.30 MSRP: $89.05
You Save: $36.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.8 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10247084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Buick Terraza Engine Mount

With a comprehensive array of OEM 2007 Buick Terraza Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Terraza Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Terraza Parts Questions & Experts Answers

Q: How to replace the engine mount on 2007 Buick Terraza?
A: The replacement of an Engine Mount requires removal of the air cleaner outlet duct alongside Engine Mount struts and the subsequent raising and supporting of the vehicle. Begin by removing the Catalytic Converter while simultaneously removing the right front wheel with tire along with the right engine splash shield. Strikes a balance between the Oil Pan and jack support by using a block of wood then proceed to remove Engine Mount to frame nuts. A combination of utility stand and block of wood placed under the Oil Pan will raise the engine while technicians remove the Engine Mount bracket to Oil Pan bolts before extracting the Engine Mount and bracket. Separate the Engine Mount bracket from its nuts and finally take out the mount from its bracket. The installation process begins with attaching the Engine Mount to the bracket and proceeding to tighten the Engine Mount bracket to Engine Mount nuts at 50 n.m (37 lb ft). First secure the Engine Mount together with the Oil Pan followed by tightening the Engine Mount bracket to Oil Pan bolts up to 58 n.m (43 lb ft). Place the engine on the utility stand before attaching the frame nuts to the Engine Mount while tightening them to 47 n.m (35 lb ft). After the right engine splash shield installation you must reinstall the right front wheel and tire and Catalytic Converter before lowering the vehicle to mount struts and reattach the air cleaner outlet duct.