How to replace the front parking brake cable on 2007 Buick Terraza?

The first step to replace the parking brake front cable requires using the Park Brake Cable Release Tool (J 37043) among other essential tools. The first step starts with left cowl side panel removal followed by carpet folding to expose the installation area. Support the vehicle in a raised position before removing the equalizer nut from the park brake cable connector. This allows you to separate the cable from the connector. First disconnect the park brake cable end from the connector and eliminate it from each cable retainer before letting the vehicle down. Proceed by removing the park brake cable end from the park brake lever clevis and utilize the Park Brake Cable Release Tool (J 37043) to pull out the cable from its position. The procedure requires installation of the new front park brake cable by connecting it between the park brake lever and the lever clevis. After vehicle support maintain elevated position to properly attach the cable to retainers and join the cable end with the connector. You must adjust the park brake cable equalizer and afterward lower the vehicle before you reposition the carpet and install the left cowl side panel.

OEM 2007 Buick Terraza Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Parking Brake Cables found

View related parts
2007 Buick Terraza Front Cable
Part Number: 15235099
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 11.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15235099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Rear Cable
Part Number: 15177263
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.6 x 11.1 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15177263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Front Cable
Part Number: 15235098
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 25960271
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.8 x 13.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15235098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Rear Cable
Part Number: 15177262
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 11.3 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15177262
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Buick Terraza Parking Brake Cable

With a comprehensive array of OEM 2007 Buick Terraza Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Terraza Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Terraza Parts Questions & Experts Answers

Q: How to replace the front parking brake cable on 2007 Buick Terraza?
A: The first step to replace the parking brake front cable requires using the Park Brake Cable Release Tool (J 37043) among other essential tools. The first step starts with left cowl side panel removal followed by carpet folding to expose the installation area. Support the vehicle in a raised position before removing the equalizer nut from the park brake cable connector. This allows you to separate the cable from the connector. First disconnect the park brake cable end from the connector and eliminate it from each cable retainer before letting the vehicle down. Proceed by removing the park brake cable end from the park brake lever clevis and utilize the Park Brake Cable Release Tool (J 37043) to pull out the cable from its position. The procedure requires installation of the new front park brake cable by connecting it between the park brake lever and the lever clevis. After vehicle support maintain elevated position to properly attach the cable to retainers and join the cable end with the connector. You must adjust the park brake cable equalizer and afterward lower the vehicle before you reposition the carpet and install the left cowl side panel.