How to replace the knock sensor on 2007 Cadillac DTS?

The Intake Manifold must be firstly removed before Knock Sensor replacement. Begin by disconnecting electrical connector attached to right Knock Sensor and left Knock Sensor electrical connector . Remove the Knock Sensor for replacement while keeping in mind the cylinder heads need removal for illustration purposes. Put the Knock Sensor in place while making sure to tighten it till it reaches 25 n.m (18 lb ft). During installation connect the electrical connector to the left Knock Sensor while connecting the electrical connector to the right Knock Sensor before reinstalling the Intake Manifold.

OEM 2007 Cadillac DTS Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Cadillac DTS Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2007 Cadillac DTS Knock Sensor

With a comprehensive array of OEM 2007 Cadillac DTS Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the knock sensor on 2007 Cadillac DTS?
A: The Intake Manifold must be firstly removed before Knock Sensor replacement. Begin by disconnecting electrical connector attached to right Knock Sensor and left Knock Sensor electrical connector . Remove the Knock Sensor for replacement while keeping in mind the cylinder heads need removal for illustration purposes. Put the Knock Sensor in place while making sure to tighten it till it reaches 25 n.m (18 lb ft). During installation connect the electrical connector to the left Knock Sensor while connecting the electrical connector to the right Knock Sensor before reinstalling the Intake Manifold.

Related 2007 Cadillac DTS Parts

Alternate Year Models

2006 Cadillac DTS Knock Sensor 2008 Cadillac DTS Knock Sensor