Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Cadillac SRX Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinders found

  • 2007 Cadillac SRX Brake Master Cylinder - 10367562
    2007 Cadillac SRX Brake Master Cylinder Diagram - 10367562
    View related parts

    2007 Cadillac SRX Master Cylinder
    Part Number: 10367562

    Product Specifications
    • Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 12.2 x 7.9 x 6.6 inches
    • Condition: New
    • SKU: 10367562
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2007 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • 2007 Cadillac SRX Brake Master Cylinder - 10367561
    2007 Cadillac SRX Brake Master Cylinder Diagram - 10367561
    View related parts

    2007 Cadillac SRX Master Cylinder
    Part Number: 10367561

    Product Specifications
    • Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 8.1 x 6.3 x 12.2 inches
    • Condition: New
    • SKU: 10367561
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2007 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • 2007 Cadillac SRX Brake Master Cylinder - 18022002
    2007 Cadillac SRX Brake Master Cylinder Diagram - 18022002
    View related parts

    2007 Cadillac SRX Master Cylinder
    Part Number: 18022002

    Product Specifications
    • Other Name: Cylinder Kit, Brake Master; Overhaul Kit; Master Cylinder Repair Kit
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.1 x 2.0 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 18022002
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac SRX Brake Master Cylinder

With a comprehensive array of OEM 2007 Cadillac SRX Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX Brake Master Cylinder Parts Questions & Experts Answers

  • Q: How to replace the brake master cylinder on 2007 Cadillac SRX?
    A: After disconnecting the Brake Fluid Level Sensor connector and the brake pipes from the master cylinder you need to install rubber seals over the brake pipe openings to avoid fluid loss and contamination. Unbolt the two nuts holding the master cylinder while sliding off its support bracket push nut from the mounting stud. Afterward, you can retract the bracket and remove the master cylinder. When reusing just take the reservoir section away from the master cylinder. When installing attach the Brake Master Cylinder reservoir to the master cylinder before you perform the master cylinder bench bleed process. Connect the master cylinder at its mounting studs to the vacuum Brake Booster using two nuts that need tightening to 25 n.m (18 lb ft). Align the air inlet panel support bracket on the mounting stud and place the push nut in place. Install the brake hoses to the master cylinder by fitting in their bracket and securing them tightly at 28 lb ft (38 N.m). Connect the electrical connector back to the Brake Fluid Level Sensor before bursting air from the brake system.

Related 2007 Cadillac SRX Parts

Alternate Year Models

+
2006 Cadillac SRX Brake Master Cylinder 2008 Cadillac SRX Brake Master Cylinder