OEM 2007 Chevrolet Equinox Rocker Arm

2007 Chevrolet Equinox Rocker Arm Parts Questions & Experts Answers

• Q: How to replace the valve rocker arm and push rods on 2007 Chevrolet Equinox?

  A: Clearance begins with removing the valve Rocker Arm covers and bolted rocker arms followed by removal of both rocker arms and pushrods. End the push rods with prelube gm p/n 1052367 (Canadian P/N 992869) or equivalent material before installation. Confirm that intake valve push rods measure 146.0 mm (5.75 in) and exhaust valve push rods measure 152.5 mm (6.0 in) precisely. Put the push rods back in their correct spots before covering the Rocker Arm contact surfaces with the same prelube substance. Reconditioning of the Cylinder Head or its components requires installing shims under the valve Rocker Arm pedestals. Installation of the valve rocker arms should be done in their original positions before bolts are installed and tightened to 42 n.m (31 lb ft). The installation process of valve Rocker Arm cover(s) must be executed as the final step.