How to replace the LH Motor and Transmission Mount on 2008 Buick LaCrosse?

In order to replace the left side transmission mount, initially, raise and support the vehicle. Remove the left tire (wheel assembly), followed by the left inner splash shield. Place a transmission jack under the transaxle and remove the upper nuts of the transaxle mount from the transaxle bracket. Carefully lift the transaxle assembly, and then remove the transaxle mount lower nuts off the frame and take off the transaxle mount from the frame. For installation, align the transaxle mount to the frame and install the transaxle mount lower nuts and slip them with 63 n.m (46 lb ft). Lower the transaxle such that the transaxle mount studs enter into the transaxle bracket, and tighten the transaxle mount upper nuts to 47 n.m (35 lb ft). First take out the transmission jack, replace the left inner splash shield, replace the left wheel and tire assembly, then put the vehicle down.

OEM 2008 Buick LaCrosse Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Motor And Transmission Mounts found

View related parts
2008 Buick LaCrosse Front Mount
Part Number: 10348601
$98.40 MSRP: $169.01
You Save: $70.61 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Engine Mount
- Position: Front
- Replaces: 22188109
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10348601
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Transmission Mount
Part Number: 22146688
$54.08 MSRP: $92.89
You Save: $38.81 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.6 x 5.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22146688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Rear Mount
Part Number: 10447321
$105.54 MSRP: $182.86
You Save: $77.32 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Engine Mount Bracket; Motor Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Rear
- Replaces: 10420010
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.1 x 6.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10447321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket
Part Number: 10345562
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 2.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345562
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Transmission Mount
Part Number: 10348602
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10348602
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket
Part Number: 10334474
Product Specifications
- Other Name: Bracket-Engine Mount; Engine Mount Bracket; Motor Mount; Lower Bracket; Bracket, Engine Mounting
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.8 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS

2008 Buick LaCrosse Motor And Transmission Mount

With a comprehensive array of OEM 2008 Buick LaCrosse Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Parts Questions & Experts Answers

Q: How to replace the LH Motor and Transmission Mount on 2008 Buick LaCrosse?
A: In order to replace the left side transmission mount, initially, raise and support the vehicle. Remove the left tire (wheel assembly), followed by the left inner splash shield. Place a transmission jack under the transaxle and remove the upper nuts of the transaxle mount from the transaxle bracket. Carefully lift the transaxle assembly, and then remove the transaxle mount lower nuts off the frame and take off the transaxle mount from the frame. For installation, align the transaxle mount to the frame and install the transaxle mount lower nuts and slip them with 63 n.m (46 lb ft). Lower the transaxle such that the transaxle mount studs enter into the transaxle bracket, and tighten the transaxle mount upper nuts to 47 n.m (35 lb ft). First take out the transmission jack, replace the left inner splash shield, replace the left wheel and tire assembly, then put the vehicle down.