OEM 2008 Cadillac SRX Sunroof Cable

2008 Cadillac SRX Sunroof Cable Parts Questions & Experts Answers

• Q: How to Replace a Sunroof Cable Assembly for the Rear Sunroof on 2008 Cadillac SRX?

  A: First, remove the rear vent window and center window panel and rear sunshade assembly to replace the rear sunroof window cable assembly. Unscrew the left or right rear track from the sunroof frame then detach the drive tube retainer from the track while lowering the track into the passenger area. Extract both the rear vent window cam assembly (3, 6) from its track and detach the rear vent window cable assembly (3, 6) from the track. Installation of the bullet-end rear window track cable assembly occurs by inserting the bullet-end first into the rear window track then pushing it completely through the track. Start by passing the drive tube cable through and then drive the cam assembly to match the track's opposite side cam. Place the drive tube retainer on the rear track while placing the cable assembly cam pin onto the cam block in the lower sunroof frame. Position the track against the lower sunroof frame. Check that the front tracks are parallel after setting the rear track assembly screws on loose. Secure the track to drive tube retainers before tightening screws to 5 n.m (44 lb in). Put back the rear sunshade assembly followed by the rear sunroof vent window and center window panel . Execute the sunroof rear vent window/sunshade initialization process as the last step.