OEM Cadillac SRX Sunroof Cable

Cadillac SRX Sunroof Cable Parts Questions & Experts Answers

• Cable
  25747587
  Q: How to Service and Repair the Sunroof Cable for the Rear Sunshade on Cadillac SRX?

  A: You need to start the procedure by lowering the headliner to access the part after opening the rear sunshade. To replace the rear sunroof sunshade cable assembly start by removing the center and rear vent windows before you take out the rear sunshade motor/actuator and the rear sunshade. Start by marking where the rear track rests on the frame then take out screws from the rear track assembly before lowering the rear track and disconnecting its extension from the track. Remove the rear extension while disconnecting the sunshade drive tube from its track position. Push the sunshade cable through the barrel end to the track end of the vehicle. Securing the barrel end first, pull the cable through the motor/actuator compartment while removing the sunshade cable from your vehicle. Position the sunshade cable to the drive tube before pushing it all the way through into the motor/actuator compartment. Position the barrel section of the cable correctly within the rear track channel. Position the rear track to the sunroof frame where previously marked positions exist and securely fasten the rear track extension and drive tubes to the rear track. Apply 5 Nm (44 lb in) torque when screwing the rear track screws but first confirm the rear track cross-vehicle measurements show acceptable results. The installation involves first attaching the rear sunshade then the rear sunroof/sunshade motor/actuator and finally the rear vent window and center window panel. Install the headliner and complete the initialization procedures for the rear vent window sunshade.