How to replace the rear door check link on Cadillac SRX?

The first step to replace the rear door check begins with removing the door trim panel. The forward half of the water deflector needs to be pulled away from the door panel to reveal access to the check. The door check and the hinge pillar bolts should first be removed followed by the check to door nuts before extracting the check from the door. Follow the Fastener Notice in Service Precautions when placing the check into the door for installation. After fastening the check to door nuts by tightening them until they reach 9 N.m (80 lb in) torque the check arm can be installed to the center pillar bolt and secured with the same torque setting. Put back the water deflector and door trim panel as the last step.

OEM Cadillac SRX Door Check

Front Door Check Strap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Checks found

View related parts
Cadillac SRX Door Check, Front
Part Number: 25812377
Product Specifications
- Other Name: Link Assembly-Front Side Door Check; Link, Front Door Hinge
- Position: Front
- Replaces: 15783070, 15226002
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Door Check, Rear Lower
Part Number: 25773003
Product Specifications
- Other Name: Link, Rear Side Door Lower Hinge
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX Door Check

Our website offers an extensive catalog of genuine Cadillac SRX Door Check at unbeatable prices. Every OEM Cadillac SRX Door Check comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac SRX Door Check Parts Questions & Experts Answers

Door Check, Rear Lower
25773003
Q: How to replace the rear door check link on Cadillac SRX?
A: The first step to replace the rear door check begins with removing the door trim panel. The forward half of the water deflector needs to be pulled away from the door panel to reveal access to the check. The door check and the hinge pillar bolts should first be removed followed by the check to door nuts before extracting the check from the door. Follow the Fastener Notice in Service Precautions when placing the check into the door for installation. After fastening the check to door nuts by tightening them until they reach 9 N.m (80 lb in) torque the check arm can be installed to the center pillar bolt and secured with the same torque setting. Put back the water deflector and door trim panel as the last step.