OEM 2005 Cadillac SRX Door Check

Front Door Check Strap
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Checks found

  • 2005 Cadillac SRX Door Check - 25812377
    2005 Cadillac SRX Door Check Diagram - 25812377
    View related parts
    Product Specifications
    • Other Name: Link Assembly-Front Side Door Check; Link, Front Door Hinge
    • Position: Front
    • Replaces: 15783070, 15226002
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 8.4 x 4.5 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 25812377
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • 2005 Cadillac SRX Door Check - 25773003
    2005 Cadillac SRX Door Check Diagram - 25773003
    View related parts
    Product Specifications
    • Other Name: Link, Rear Side Door Lower Hinge
    • Position: Rear Lower
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 8.5 x 4.4 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 25773003
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac SRX Door Check

With a comprehensive array of OEM 2005 Cadillac SRX Door Check, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac SRX Door Check are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac SRX Door Check Parts and Q&A

  • Q: How to replace the rear door check link on 2005 Cadillac SRX?
    A: The first step to replace the rear door check begins with removing the door trim panel. The forward half of the water deflector needs to be pulled away from the door panel to reveal access to the check. The door check and the hinge pillar bolts should first be removed followed by the check to door nuts before extracting the check from the door. Follow the Fastener Notice in Service Precautions when placing the check into the door for installation. After fastening the check to door nuts by tightening them until they reach 9 N.m (80 lb in) torque the check arm can be installed to the center pillar bolt and secured with the same torque setting. Put back the water deflector and door trim panel as the last step.

Related 2005 Cadillac SRX Parts