How to Replace Coil Springs on 2008 Chevrolet Equinox?

The first step to replace the coil spring starts by raising the vehicle while using support. Participants must start by taking out the wheel along with the rear tire before removing the stabilizer shaft link. Set a jackstand beneath the lower Control Arm and lift the component slightly to reduce coil spring tension. Start by removing the lower shock's bolt and nut and gradually loosen the lower Control Arm to support frame bolt and nut then lower Control Arm to knuckle bolt and nut. Start by lowering the Control Arm until you unload the coil spring. Wait until the spring is unloaded before removing both coil spring and insulators. You should examine both upper and lower coil spring insulators. The existing components should stay in place during replacement while you inspect the damaged insulators. Replace any damaged insulators otherwise keep the current ones. Set the rubber-encased spring inside the car and use the jackstand to press down on the spring. Place the lower Control Arm onto the knuckle before installing the bolt and nut. Torque both components to 160 n.m (118 lb ft) for the knuckle and lower Control Arm connection. Installation of the shock requires tightening the lower Control Arm nut and bolt to 110 n.m (81 lb ft). To complete the installation replace the jackstand under the vehicle while you put on the stabilizer shaft link followed by attaching the rear tire and wheel assembly before you lower the vehicle.

OEM 2008 Chevrolet Equinox Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Springs found

View related parts
2008 Chevrolet Equinox Coil Spring, Front Part Number: 15251298
$22.25 MSRP: $77.74
You Save: $55.49 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 8.70 Pounds
- Item Dimensions: 18.9 x 10.6 x 8.2 inches
- Condition: New
- Require Quantity: 2
- SKU: 15251298
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Coil Spring, Rear Part Number: 20884744
$64.30 MSRP: $129.10
You Save: $64.80 (51%)
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Replaces: 15940292, 15940290, 25971723
- Item Weight: 6.70 Pounds
- Item Dimensions: 17.1 x 6.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20884744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Coil Spring, Rear Part Number: 20884743
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 25971724, 15940291, 15940293
- Item Weight: 6.60 Pounds
- Item Dimensions: 17.4 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20884743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Coil Spring, Rear Part Number: 15940294
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Item Weight: 6.00 Pounds
- Item Dimensions: 13.3 x 8.8 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15940294
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Coil Spring, Front Part Number: 25832101
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Item Weight: 10.20 Pounds
- Item Dimensions: 23.4 x 9.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25832101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Coil Spring, Rear Part Number: 15940295
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Item Weight: 5.80 Pounds
- Item Dimensions: 13.8 x 8.7 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15940295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2008 Chevrolet Equinox Coil Springs

With a comprehensive array of OEM 2008 Chevrolet Equinox Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Coil Springs Parts and Q&A

Q: How to Replace Coil Springs on 2008 Chevrolet Equinox?
A: The first step to replace the coil spring starts by raising the vehicle while using support. Participants must start by taking out the wheel along with the rear tire before removing the stabilizer shaft link. Set a jackstand beneath the lower Control Arm and lift the component slightly to reduce coil spring tension. Start by removing the lower shock's bolt and nut and gradually loosen the lower Control Arm to support frame bolt and nut then lower Control Arm to knuckle bolt and nut. Start by lowering the Control Arm until you unload the coil spring. Wait until the spring is unloaded before removing both coil spring and insulators. You should examine both upper and lower coil spring insulators. The existing components should stay in place during replacement while you inspect the damaged insulators. Replace any damaged insulators otherwise keep the current ones. Set the rubber-encased spring inside the car and use the jackstand to press down on the spring. Place the lower Control Arm onto the knuckle before installing the bolt and nut. Torque both components to 160 n.m (118 lb ft) for the knuckle and lower Control Arm connection. Installation of the shock requires tightening the lower Control Arm nut and bolt to 110 n.m (81 lb ft). To complete the installation replace the jackstand under the vehicle while you put on the stabilizer shaft link followed by attaching the rear tire and wheel assembly before you lower the vehicle.